Samsung SCP-3120VH User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCP-3120VH
  6. User manual
Samsung SCP-3120VH User Manual

Samsung SCP-3120VH User Manual

12x speed dome camera
Hide thumbs Also See for SCP-3120VH:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCP-3120VH

Summary of Contents for Samsung SCP-3120VH

  • Page 2 Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
  • Page 3 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

  • Page 4: Table Of Contents

    Preparing and Installing Camera Bracket Installation Examples SCP-3120(On-Ceiling Mount Type Installation Example) SCP-3120(Flush Mount Type Installation Example) "SCP-3120V(Ceiling Mount)" "SCP-3120V(Mount onto the optimal adaptor)" "SCP-3120VH" Interface Symbols • Operating Your Camera OSD Commands, Function Chart, and Menu Controls Operating Your Camera •...
  • Page 5 Sequence Setting Preset Swing SEQ Group SEQ Tour SEQ PTZ Trace Auto Run Schedule Power On Resume P/T Setting Pan Limit Tilt Limit Area Setting Area Masking Prop. P/T Digital Flip Image Hold Jog Speed Max Speed Level OSD Setting OSD Setting OSD Setting(Others) Alarm Setting...

  • Page 6: Features

    RS-485, Coaxial communication methods are supported. With its daytime & nighttime switch and Sens-Up - RS-485 (10 protocols) : Samsung-T, Pelco (D / P), Samsung-E, functions based on the ICR (Infrared Cut filter Removal) Panasonic, Honeywell, AD, Vicon, GE, BOCSH...

  • Page 7: Warnings & Cautions

    Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
  • Page 8 Warnings & Cautions Warnings Stop using the camera if smoke or Do not install on your own. abnormal heat is detected. This installation should be made by a qualified service May cause fire. person. Installing this product on your own may result in fire or electric shock.
  • Page 9 Cautions Do not install under extreme Do not install under unstable lighting temperature conditions. conditions. Only use in the temperature range of between -10ºC and Severe lighting changes or flickering may hinder normal +50ºC to prevent low graphics quality and product camera operation.
  • Page 10 Warnings & Cautions Detailed Warnings and Cautions - Avoid operating the camera for long durations under high temperatures and in high humidity. Excessive heat can shorten the lifespan of the camera components. - Do not install or place the camera near any heat sources. - Subjecting the dome cover to physical shock may damage the camera.

  • Page 11: Components And Accessories

    Components and Accessories SCP-3120 Body Mount Bracket User Guide 7Pin Terminal Block 8Pin Terminal Block BNC Cable Screw(M4x20, 4EA) Templet SPEED DOME CAMERA User Guide...
  • Page 12 Components and Accessories SCP-3120V Body User Guide 7Pin Terminal Block 8Pin Terminal Block BNC Cable Screws/Plastic Anchor/Wrench SPEED DOME CAMERA User Guide...
  • Page 13 SCP-3120VH Body User Guide 7Pin Terminal Block 8Pin Terminal Block BNC Cable Wrench SPEED DOME CAMERA User Guide...
  • Page 14 (Note that you should follow the applicable instructions for each mounting adaptor.) Used to Mount the Camera(SCP-3120/3120V) onto the ceiling : Hanging Mount + Ceiling Mount Used to Mount the Camera(SCP-3120VH) onto the ceiling : Ceiling Mount Used to Mount the Camera(SCP-3120/3120V) onto the wall : Hanging Mount + Wall Mount Used to Mount the Camera(SCP-3120VH) onto the wall : Wall Mount Used to Mount “the Wall Mount”...

  • Page 15: Component Names And Functions

    Component Names and Functions Front Side Bottom ➊ Screw Hole ➋ Communication Setup Switch ➌ ID Setup Switch ➍ Video/Communication/Power ➎ Alarm ➎ ➍ ➌ ➋ ➊ Notes • For the DIP switch settings, please refer to the “Installing Your Camera” on Page 19. SPEED DOME CAMERA User Guide...
  • Page 16 Component Names and Functions Front Side Bottom ➊ Communication Setup Switch ➋ ID Setup Switch ➌ Video/Communication/Power ➍ Alarm ➌ ➍ ➊ ➋ SPEED DOME CAMERA User Guide...
  • Page 17 Front Side Bottom ➊ Communication Setup Switch ➋ ID Setup Switch ➌ Video/Communication/Power ➍ Alarm ➌ ➍ ➊ ➋ SPEED DOME CAMERA User Guide...
  • Page 18 Component Names and Functions Camera Wiring Interface Board For the camera wiring, please refer to the picture below. The camera's wiring interface board is fitted to the housing, this is sold separately. (When using coaxial communication, a separate control signal connection is not required.) Alarm Video Controller Power Supply Controller &...

  • Page 19: Installing Your Camera

    Installing Your Camera How to Set Up Protocols and ID DIP Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment.

  • Page 20: Communication Dip Switch Settings (Sw2)

    Protocol Settings Baud Rate Settings Response Mode Settings Termination Settings Protocol Settings • Select a communication protocol for the camera Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 AUTO DETECT Samsung-T Pelco-D Pelco-P Samsung-E Panasonic Vicon Honeywell BOSCH Resetved Resetved Resetved Resetved Resetved •...

  • Page 21: Communication Response Settings

    Iris Open/Focus Near • Note that LCD monitor does not switch to OSD mode and the Joystick will not provide Enter operation, when using the OSD menu with Samsung-E protocol. Camera ID DIP Switch Settings (SW1) To set up camera IDs, refer to the “Camera ID Chart” next.

  • Page 22: Camera Id Chart

    Installing Your Camera • Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF SPEED DOME CAMERA User Guide...
  • Page 23 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SPEED DOME CAMERA User Guide...
  • Page 24 Installing Your Camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SPEED DOME CAMERA User Guide...
  • Page 25 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SPEED DOME CAMERA User Guide...
  • Page 26 Installing Your Camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SPEED DOME CAMERA User Guide...
  • Page 27 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SPEED DOME CAMERA User Guide...

  • Page 28: Preparing Adapter And Cables

    Installing Your Camera Preparing Adapter and Cables (Sold Separately) – Power Adapter Power adapter has the capacity AC24V 1.0A(SCP-3120)/2.5A(SCP-3120V/VH). – Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.

  • Page 29: Preparing And Installing Camera Bracket

    Preparing and Installing Camera Bracket For the installation guidelines for the brackets and housings, refer to the user’s manual enclosed with the bracket or housing that is sold separately. • Camera Wiring Diagram RS-485 RS-485 Coaxial Communication Coaxial Communication CONTROL LINE VIDEO LINE CONTROLLER (SUB) CONTROLLER (MAIN)

  • Page 30: Installation Examples

    Installing Your Camera Installation Examples - The pictures below show the front view of the camera installed with a wall or flush bracket. For more instructions on installing the camera, please refer to the following guidelines. Ceiling Wall Mount Type Installation Flush Mount Type Installation SPEED DOME CAMERA User Guide...

  • Page 31: Scp-3120(On-Ceiling Mount Type Installation Example)

    On-Ceiling Mount Type Installation Example 1. Attach Template Attach the template on the ceiling, facing the “Front” mark to the main monitoring direction. Drill a hole in the ceiling according to the 60 mm diameter hole marked on the template, and then drop the camera cables down through the hole. 2.
  • Page 32 Installing Your Camera 3. Assemble Camera & Bracket - Cameras on the sides 'Align The Arrow' triangle corner mount bracket and the arrow shows a match to match. - Insert the mount bracket to the matching holes in the camera, and then turn the camera clockwise.
  • Page 33 5. Connect Cables Connect each camera cable to the proper terminals on the bottom of the camera. For more detailed instructions, please refer to Page 18:“Camera Wiring Interface Board”. 6. Camera DIP Switch Setup DIP switches for communication and ID setup are located on the bottom of the camera. For more instructions, please refer to Page 20.

  • Page 34: Scp-3120(Flush Mount Type Installation Example)

    Installing Your Camera Flush Mount Type Installation Example 1. Drill Hole on the Ceiling Attach the template, and then drill a hole according to the 120 mm diameter hole marked on the template. Drop down the camera cables through the hole. Drill another small hole for a screw to secure the camera.
  • Page 35 3. Detach the Mount Housing Remove the 3 screws, and then detach the mount housing from the camera. 4. Connect Cables & Camera Setup Connect each camera cable to the proper terminals on the bottom of the camera (Refer to Page 18: “Camera Wiring Interface Board”).
  • Page 36 Installing Your Camera 5. Install Camera Install Camera Fit the camera to the hole on the ceiling, and then secure the camera using 3 Product-enclosed Fixture Screws (M4x20). Ceiling Screw Screw 6. Assemble Dome Cover Assemble Dome Cover Insert the grooves on the dome cover into ones on the camera, and then turn clockwise to fasten.

  • Page 37: Scp-3120V(Ceiling Mount)

    SCP-3120V (Ceiling Mount) 1. Use the provided L-shaped wrench to remove the surface mount by loosening 4 screws counter clockwise. surface body screw 2. Drill holes (5 mm in diameter and at least 35 mm in depth for each) for the screws (x4) to be inserted in the bottom of the surface mount, and insert the provided plastic anchor (HUD5) to the end.
  • Page 38 Installing Your Camera 3. Connect the safety wire (attached to the camera) to the surface mount as shown. Then, arrange the cables. (For more information about the wiring, refer to "Camera Wiring Interface Board(18 Page)".) SAFETY-WIRE 4. Arrange the cables inside the surface mount so that they should not be entangled or stuck in, and align the guide rib of the camera with that of the surface mount.

  • Page 39: Scp-3120V(Mount Onto The Optimal Adaptor)

    SCP-3120V (mount onto the optimal adaptor) 1. Follow step 1 in "Ceiling Mount" above and remove the surface mount. 2. Insert the cables into the cable hole on the surface mount and fix them to SBP- 300HM (HANGING MOUNT) using SCREW-MACHINE (BH, M4xL10, x4). 3.

  • Page 40: Scp-3120Vh

    Installing Your Camera 1. Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which will help removing the housing. HOUSING MAIN-FRAME SCREW SCREW 2. Fix the housing to the NP 1.5" tapped pipe, wall mount (SBP-300WM) or ceiling mount (SBP-300CM) by turning it clockwise.
  • Page 41 3. Secure the safety wire (attached to the product) to the housing as shown. (For details about the cable connection, refer to the "Camera Wiring Interface Board" section in this manual.) SAFETY WIRE SAFETY WIRE 4. Arrange the cables inside the housing lest they be damaged or stuck in, and use the L-shaped wrench to tighten 4 screws to the housing.

  • Page 42: Interface Symbols

    Interface Symbols • Motion Detection Standby/Operation Display : - When in standby mode, the " " in the upper right of the screen blinks and then changes to " " if motion is detected. • Alarm Input Port Status Display : - "①","②"...

  • Page 43: Operating Your Camera

    • OSD Menu Screen : Camera Setting Zoom/Focus Sub Menu Available White Balance ATW(IN) Sub Menu Not Available Operating Your Camera • Panning and Tilting - Use the joystick of the controller or its direction buttons. • Controlling Zoom - Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the zoom buttons. •...

  • Page 44: Operating Your Camera

    Operating Your Camera *OSD Menu Chart Focus Mode AUTO/MANUAL/ONESHOT Zoom/Focus Digital Zoom OFF/2X/3X/4X/5X/…/16X ATW(IN)/ATW(OUT) White Balance 0~255 Manual Blue 0~255 Brightness 0~64 AUTO Iris MANUAL Iris Value(0~64) Shutter A.FLK Exposure MANUAL Shutter Speed Sens-Up Sens-up Limit 2X/4X… Auto 512X Limit LOW/MEDIUM/HIGH Camera Setting Back Light...
  • Page 45 Preset Setting/Edit/Home Position/Execute/Clear/Status Pan Swing Setting/Execute/Clear Swing SEQ. Tilt Swing Setting/Execute/Clear P/T Swing Setting/Execute/Clear Group SEQ. Group1~6 Setting/Execute/Clear Tour SEQ. Setting/Execute/Clear PTZ Trace Trace1~4 Replay/Replay Once/Memorize/Clear SCHEDULE Sunday~Saturday Sequence A.PAN AutoPan Speed/Tilt Angle Setting TRACE Trace(1~4) TOUR Mode Auto Run GROUP Group No(1~6) Swing Mode...
  • Page 46 Operating Your Camera Camera ID ON/OFF ON/OFF Camera Name Edit Camera Name Preset Number ON/OFF ON/OFF Preset Name Edit Seq. Status ON/OFF Area Name ON/OFF PTZ Position ON/OFF OSD Setting ENGLISH/CHINESE/FRENCH/GERMAN/SPANISH/ITALIAN/ Language PORTUGUES/KOREAN On/Off ON/OFF Direction Set North Dir. Set North Direction Display ON/OFF Date Format...

  • Page 47: Functional Description

    Functional Description Camera Setting 1. Zoom/Focus Settings 1.1 Focus Mode and Digital Zoom Setting Menu Main Menu/Camera Setting/Zoom/Focus Focus Mode : Main Menu - AUTO : Performs continuous auto-focus. Camera Setting - MANUAL : Changes the camera mode to Manual Focus. Sequence Setting - ONESHOT : Auto-focuses the camera once after the Pan, P/T Setting...

  • Page 48: White Balance

    Functional Description 2. White Balance Main Menu/Camera Setting/White Balance The White Balance menu adjusts the balance of the screen Main Menu colors under different lighting conditions. Camera Setting - ATW(IN) : Adjusts the screen color to be optimal in an Sequence Setting indoor environment.

  • Page 49: Exposure

    3. Exposure Main Menu/Camera Setting/Exposure The Exposure settings are to control the camera’s exposure meter. Main Menu Brightness : Adjusts the screen brightness. Camera Setting (Over 32: Brighter, Under 32: Darker) Sequence Setting It may not fully operable under extremely low lighting condition. P/T Setting Iris : OSD Setting...

  • Page 50: Backlight

    Functional Description 4. Backlight 4.1 Backlight Mode Settings Main Menu/Camera Setting/Back Light Unlike other cameras, Samsung Techwin’s unique A1 Main Menu DSP chip gives you a clear image of the subject even with Camera Setting bright backlight. Sequence Setting Back Light Mode : P/T Setting - OFF : Disables the Backlight mode.
  • Page 51 4.2 WDR Main Menu/Camera Setting/Back Light/WDR When there are both bright and dark areas at the same time, this Main Menu mode makes both areas distinctive. Camera Setting Sequence Setting P/T Setting OSD Setting Alarm Setting Initialize Password Setting Status WDR ON WDR OFF Limit...
  • Page 52 Functional Description 4.3 BLC Setting Main Menu/Camera Setting/Back Light/BLC You can selectively choose a screen area to see objects within Main Menu the area more clearly than others. Camera Setting Four-direction Joystick Controls : Sequence Setting P/T Setting - Moving the joystick in all four directions—upward, OSD Setting downward, left, and right—adjusts the location and size of Alarm Setting...

  • Page 53: Agc

    5. AGC Main Menu/Camera Setting/AGC AGC (Automatic Gain Control) adjusts the camera’s gain control Main Menu and the screen brightness if the camera has captured an object Camera Setting under low-light conditions. Sequence Setting The OFF, LOW, MEDIUM, HIGH, and MANUAL modes are P/T Setting available.

  • Page 54: Dnr(Dynamic Noise Reduction)

    Functional Description 6. DNR (Dynamic Noise Reduction) Main Menu/Camera Setting/DNR DNR significantly reduces the amount of low luminance noise. Main Menu - OFF : Disables the noise reduction function. Camera Setting - LOW : Reduces only a small amount of noise, but generates Sequence Setting almost no afterimage.

  • Page 55: Xdr(Extended Dynamic Range)

    7. XDR(eXtended Dynamic Range) Main Menu/Camera Setting/XDR XDR illuminates darker spots of an image while retaining Main Menu the same light level for brighter spots to even out the Camera Setting overall brightness of the image with high contrast Sequence Setting between bright and dark spots.

  • Page 56: Day/Night

    Functional Description 8. Day/Night Main Menu/Camera Setting/Day/Night The Day & Night function allows the camera to switch between Main Menu the Color and B/W modes. Camera Setting Modes : Sequence Setting - Auto : Operates in Color mode most times, and switches to P/T Setting B/W mode if a low light level is detected during OSD Setting...

  • Page 57: Others

    9. Others Main Menu/Camera Setting/Others Sync : Main Menu - INTERNAL : Synchronizes the camera’s output timing to the Camera Setting internal crystal. Sequence Setting - LINE LOCK: Synchronizes the camera’s output timing to the P/T Setting AC adapter power to synchronize multiple OSD Setting cameras.

  • Page 58: Sequence Setting

    Functional Description Sequence Setting 10. Preset 10.1 Preset Location Saving Main Menu/Sequence Setting/Preset/Setting This function enables the memorization of a selected location and Main Menu activates the Pan, Tilt, and Zoom functions at that location. Saved Camera Setting locations can be recalled using the Preset Execute command. Sequence Setting P/T Setting Setting Up Preset Numbers :...
  • Page 59 10.2 Preset Edit Main Menu/Sequence Setting/Preset/Edit You can edit the 13 preset items such as Pan/Tilt location, Zoom Main Menu and Focus, which are selected among camera functions. Camera Setting PTZ : Sequence Setting ..Recalls saved locations using the Preset Settings command. Focus Mode : Refer to the section entitled Setting Up Your Camera.
  • Page 60 Functional Description 10.3 Motion Detection Main Menu/Sequence Setting/Preset/Edit/Motion Det. Commands the camera to perform Motion Detection after it Main Menu arrives at a selected preset location. Camera Setting Motion Sequence Setting - You can enable the motion detection and tracking functions..
  • Page 61 10.4 Preset Name Setting Main Menu/OSD Setting/Preset Name/Edit Using this function, you can add names to preset locations. Main Menu up to 12 characters. Camera Setting Once a name is entered, use the joystick and the Enter key to Sequence Setting perform the Set command and save the name.
  • Page 62 Functional Description 10.5 Preset Execution/Deletion/Memory Check Main Menu/Sequence Setting/Preset Home Position : Main Menu Sets one of the currently configured preset positions as the Camera Setting home position. Sequence Setting Execute : P/T Setting Recalls a saved preset location. OSD Setting Alarm Setting Clear : Initialize...

  • Page 63: Swing Seq

    11. Swing SEQ Main Menu/Sequence Setting/Swing SEQ The Swing function commands the camera to move between 2 Main Menu selected locations, monitoring the route. Camera Setting Pan Swing : Sequence Setting Activates the Pan function for the Swing operation. P/T Setting Tilt Swing : OSD Setting Alarm Setting...

  • Page 64: Group Seq

    Functional Description 12. Group SEQ Main Menu/Sequence Setting/Group SEQ Selecting Group SEQ recalls a group of multiple preset locations Main Menu in a consecutive manner. A group can contain up to 128 preset Camera Setting locations. Sequence Setting P/T Setting Setting : OSD Setting Using the joystick, enter desired preset numbers into the...

  • Page 65: Tour Seq

    13. Tour SEQ Main Menu/Sequence Setting/Tour SEQ Selecting Tour SEQ recalls groups of preset locations in a Main Menu consecutive manner. Up to 6 groups can be listed for this Camera Setting function. Sequence Setting Settings : P/T Setting OSD Setting Selecting the Settings menu brings up the following screen.

  • Page 66: Ptz Trace

    (When using the SCC-3100A/SCC-1000 controller) PTZ Trace * When Using Different Protocols Auto Run Protocol Product Memorize Pause Power On Resume PELCO-D/P KBD300A Ack, Iris Open Samsung-E SCC-5000 OSD On, Iris Open PANASONIC WV-CU161C OSD ON PTZ Trace VICON V1300X-DVC Iris Open HONEYWELL...

  • Page 67: Auto Run

    15. Auto Run Main Menu/Sequence Setting/Auto Run If there is no controller operation by the user for a certain time, Main Menu the sequence operation designated by the user will be executed. Camera Setting Sequence Setting P/T Setting Mode : OSD Setting - HOME : Auto run Home Position (Refet to the Preset Menu.) Alarm Setting...

  • Page 68: Schedule

    Functional Description 16. Schedule Schedule enables you to schedule a sequencing action by day and time. Select Day : Auto Run At Auto Run, select SCHEDULE to set up each day of the week, Mode SCHEDULE as shown on the side picture. Select a day, change to ON, and Time 30 SEC then press Enter.

  • Page 69: Power On Resume

    17. Power On Resume Main Menu/Sequence Setting/Power On Resume Power On Resume : Main Menu This is useful when the power is disconnected and Camera Setting reconnected due to power failures or other power Sequence Setting interruptions. P/T Setting If the camera was performing a sequence action prior to a OSD Setting power disconnection, the camera automatically resumes the Alarm Setting...

  • Page 70: P/T Setting

    Functional Description P/T Setting 18. Pan Limit Main Menu/P/T Setting/Pan Limit The moving ranges in the Pan directions can be limited. Main Menu Camera Setting Position : Sequence Setting Selecting the Position menu brings up the following screen if P/T Setting it is for the Pan Limit setting.

  • Page 71: Tilt Limit

    19. Tilt Limit Main Menu/P/T Setting/Tilt Limit These settings limit the movement range of the Tilt operation. Main Menu Position : Camera Setting Selecting the Position menu brings up the following screen Sequence Setting if it is for the Tilt Limit setting. Move the joystick left and P/T Setting right to select a movement range from the starting point to OSD Setting...

  • Page 72: Area Setting

    Functional Description 20. Area Setting Main Menu/P/T Setting/Area Setting The Area Setting menu enables selecting certain locations in the Main Menu course of the Pan and Tilt operation, and then display the areas Camera Setting with the OSD (On Screen Display) texts when the camera passes Sequence Setting through them.

  • Page 73: Area Masking

    21. Area Masking Main Menu/P/T Setting/Area Masking If a monitoring location includes a highly private area, the area Main Menu can be selectively excluded from monitoring. Camera Setting Sequence Setting Mask Set P/T Setting You can set up to 12 privacy zones that will be hided for OSD Setting privacy of the subject when recording.

  • Page 74: Prop. P/T

    Functional Description 22. Prop. P/T Main Menu/P/T Setting/Prop.P/T This commands the camera to change the Pan and Tilt speed Main Menu automatically according to the current zoom ratio. Moving the Camera Setting joystick clockwise (Tele) slows down and counterclockwise Sequence Setting (Wide) accelerates the Pan and Tilt speed, allowing detailed P/T Setting adjustments.

  • Page 75: Digital Flip

    23. Digital Flip Main Menu/P/T Setting/Digital Flip Digital Flip is useful to monitor a moving object or a person Main Menu passing directly under the camera. Camera Setting When an object or a person passes directly under the camera, Sequence Setting the camera tilt monitor follows the object or person over 100 P/T Setting degrees to the other side of the tilt area without panning.

  • Page 76: Image Hold

    Functional Description 24. Image Hold Main Menu/P/T Setting/Image Hold When the camera is moving between presets locations, this Main Menu function freezes the cameras image until the camera reached Camera Setting the next location. This is useful to help the screen observer keep Sequence Setting sharp eyes and to monitor multiple locations within a network.

  • Page 77: Jog Speed

    25. Jog Speed Main Menu/P/T Setting/Jog Speed If the speed of your controller or DVR’s Pant/Tilt command Main Menu protocol is fixed and causes slow panning and tilting, you Camera Setting can use Manual mode. Sequence Setting P/T Setting - MANUAL : The angle of the controller handle determines OSD Setting the speed of Pan and Tilt;...

  • Page 78: Max Speed Level

    Functional Description 26. Max Speed Level Main Menu/P/T Setting/Max Speed Level Adjusts the maximum speed of Pan and Tilt while Main Menu performing the Preset and Sequencing actions. Camera Setting Sequence Setting - 1~7: Pan and Tilt operations can be set up to 650°/ sec. P/T Setting OSD Setting Alarm Setting...

  • Page 79: Osd Setting

    OSD Setting 27. OSD Setting Main Menu/OSD Setting Camera ID : Main Menu Displays or hides Camera ID in the upper left of the screen. Camera Setting Camera Name : Sequence Setting Add a name to the camera. (First check the Note.) P/T Setting Preset Number : OSD Setting...

  • Page 80: Osd Setting(Others)

    Functional Description 28. OSD Setting(Others) Main Menu/OSD Setting/Others OSD Setting is to set up the OSD (On Screen Display) Main Menu functions. Camera Setting Direction : Indicates the current angle of the camera: Sequence Setting East, West, South, North, Southeast, Southwest, P/T Setting Northeast, or Northwest.

  • Page 81: Alarm Setting

    Alarm Setting 29. Alarm Setting 29.1. Setting Up Alarm Input Main Menu/Alarm Setting/Alarm Input Alarm Enable : Main Menu - On/Off : Enables or disables the Alarm function. Camera Setting MOD : Sequence Setting Enables selecting an Alarm Input method. P/T Setting - NO (Normally Opened) OSD Setting...
  • Page 82 Functional Description Notes • As shown in the picture above, the Alarm Input must be entered with the Open or Closed switch signals. Supplying power without entering the signals may damage the product. P (Priority) : Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated, the alarm with the highest priority activates before the others.
  • Page 83 29.2. Alarm Output Main Menu/Alarm Setting/Alarm Output Setting 1,2 : Main Menu Enables selecting an Alarm Output method. Camera Setting - 1, 2, Motion, and Support Device indicate alarm input Sequence Setting ports, Motion Detection, and support device input. A total of P/T Setting 4 alarms, Motion Detection, and support devices can be set OSD Setting...
  • Page 84 Functional Description AUX Output menu is to operate the camera’s peripheral devices such as lamps and sirens through the controller and switches as well as through network communications. OUT Off 1,2 : - When an alarm event occurs, the output force can be terminated. AUX Off AUX On Notes...

  • Page 85: Initialize

    Initialize 30. Initialization Menu Main Menu/Initialize Power On Reset : Main Menu Restarts the camera. Camera Setting Factory Default Set : Sequence Setting Enables resetting the camera to its factory default settings. P/T Setting When the mode is selected, all custom data such as preset OSD Setting locations is deleted from the camera.

  • Page 86: Password Setting

    Functional Description Password Setting 31. Password Setting Main Menu/Password setting The Password feature enables you to configure a Main Menu password for rebooting the camera and accessing the Camera Setting OSD and preventing unauthorized modification of Sequence Setting existing camera settings. P/T Setting On/Off : OSD Setting...

  • Page 87: Status

    Status 32. Status Main Menu/Status Displays the settings and version of the dome camera. Main Menu Camera Setting CAM MODEL : Sequence Setting Indicates the model name of the camera. P/T Setting CAM VERSION : OSD Setting Indicates the software version of the camera. Alarm Setting DOME VERSION : Initialize...

  • Page 88: Troubleshooting

    Troubleshooting Problem Cause and Solution PAGE Check if the camera and peripheral devices are properly connected. Controller does not work. Verify the setups of ID, protocol, and baud 20~27 rates. Check if power cable is securely connected to the camera and the monitor. Check if the video cable is properly 18~29 connected.
  • Page 89 Check if the video cable is properly connected. Digital noise appears in Make sure that the power cable and video picture. cable do not exceed the recommended maximum lengths. Adjust Sharpness level. Picture's colors are not Check the White Balance. good.
  • Page 90 Troubleshooting The camera's position This phenomenon may happen, since the differs from the position motors have a margin error of ±0.1˚. defined in a preset. Check if Preset or another operation mode 58~62 Sequence configuration of has been set. the camera does not work. Check the Auto Refresh settings.

  • Page 91: Product Specification

    Product Specification SCP-3120 SCP-3120V SCP-3120VH Imaging Device SONY 1/4inch, ExView-HAD PS CCD(ICX-448/449) TV Standard NTSC / PAL Total Pixel NTSC : 811(H) × 508(V) / PAL: 795(H) × 596(V) Effective Pixels NTSC : 768(H) × 494(V) / PAL: 752(H) × 582(V)
  • Page 92 OFF / LOW / MEDIUM / HIGH / MANUAL White Balance ATW(IN) / ATW(OUT) / AWC / MANUAL Electronic Shutter NTSC:1/60~10,000sec, PAL:1/50~10,000sec Serial Communication RS485, Coaxial Communication SAMSUNG-T, SAMSUNG-E, Pelco-D, Pelco-P, Pelco Coaxitron, Protocol Panasonic, Honeywell, AD, Vicon, BOSCH, GE Alarm 2 In, 2 Out Digital Flip ON/OFF Waterproof Standards ·...
  • Page 93 Dimension SCP-3120 (Unit : mm) Ø154 SPEED DOME CAMERA User Guide...
  • Page 94 Dimension SCP-3120V 3/4 Inch Threaded Pitch 1.8143 Thread angle : 55 Basic Hole : 24.117 Ø165 SPEED DOME CAMERA User Guide...
  • Page 95 SCP-3120VH NP 1.5Inch Threaded Ø200 SPEED DOME CAMERA User Guide...
  • Page 96 DECLARATION OF CONFORMITY Application of Council Directive(s) 2004/108/EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment Speed Dome Camera Model Name SCP-3120/3120V/3120VH Beginning Serial NO.
  • Page 97 MEMO SPEED DOME CAMERA User Guide...
  • Page 98 MEMO SPEED DOME CAMERA User Guide...
  • Page 99 MEMO SPEED DOME CAMERA User Guide...
  • Page 100 MEMO SPEED DOME CAMERA User Guide...
  • Page 101 MEMO SPEED DOME CAMERA User Guide...
  • Page 102 MEMO SPEED DOME CAMERA User Guide...
  • Page 103 MEMO SPEED DOME CAMERA User Guide...
  • Page 104 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Scp-3120Scp-3120v

Table of Contents