Protocol Settings; Baud Rate Settings; Communication Response Settings; Termination Settings - Samsung SCP-3120 User Manual

Installing Your Camera
Communication Protocol DIP Switch Settings (SW2)
* Coaxial communication automatically detects signals, and so does not require a
separate communication setup process.
ON
ON
OFF
SW2

Protocol Settings

 •
Select a communication protocol for the camera
No Protocol SW2-#1 SW2-#2
1 AUTO DETECT OFF
2 Samsung-T OFF
3 Pelco-D OFF
4 Pelco-P OFF
5 Samsung-E OFF
6 Panasonic OFF
7 Vicon OFF
8 Honeywell OFF
9 AD ON
10 GE ON
11 BOSCH ON
12 Resetved ON
13 Resetved ON
14 Resetved ON
15 Resetved ON
16 Resetved ON
 •

Baud Rate Settings

Select the transfer speed of a selected communication protocol.
No. Baud Rate(BPS)
1 2,400
2 4,800
3 9,600
4 19,200
SPEED DOME CAMERA
SW2 Pin No. Purpose
1~4 Protocol Settings
5~6 Baud Rate Settings
7 Response Mode Settings
8

Termination Settings

SW2-#3 SW2-#4
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
SW2-#5 SW2-#6
ON ON
ON OFF
OFF OFF
OFF ON
20
User Guide
 •

Communication Response Settings

Select a communication response method for the camera and controller: Response or No
Response.
Function
SW2- #7 Response Mode Switch
 • Termination Settings
To prevent the attenuation of communication signals between the camera and controller,
the items at the end of line must be set up with the termination settings.
Camera Input Position SW2- #8
Termination of Longest Path ON
On the Path OFF
* This model is provided with factory defaults of all DIP switches set to OFF. The default
settings are shaded in the table.
Notes
 •  T ouseathirdpartycontrollerwiththisproduct,pleasecontactourAfter-SalesService
or Technology Department.
 •  C ontrolsUsingDifferentProtocols
AD Protocol
Entering Camera OSD 3+Auxilary ON
Exiting Camera OSD 3+Auxilary OFF
ENTER IRIS OPEN
ESC IRIS CLOSE
 •  F ormoreinformationabouttheprotocols,refertoourofficialwebsite.

Camera ID DIP Switch Settings (SW1)

To set up camera IDs, refer to the "Camera ID Chart" next.
ON
SW1
SPEED DOME CAMERA
ON OFF
Response No Response
VICON Protocol GE Protocol
IRIS OPEN IRIS OPEN
IRIS CLOSE IRIS CLOSE
IRIS OPEN IRIS OPEN
IRIS CLOSE IRIS CLOSE
ON
OFF
21
User Guide