Sequence Setting - Samsung SCP-3120V User Manual

functional description

SEQUENCE SETTING

Preset
Preset Location Saving
►
Main Menu/Sequence Setting/Preset/Setting
This function enables the memorization of a selected
location and activates the Pan, Tilt, and Zoom
functions at that location. Saved locations can be
recalled using the Preset Execute command.
•
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a
screen as shown below. Move the joystick in
all four directions to select the desired
number. (Only SCC-3100A, SCC-1000)
Preset Setting
Preset = 001 (255)
•
Saving Preset Locations :
Selecting a preset number and pressing the
Enter key redirects the menu to the screen
shown below.
Using the joystick, adjust the location of the
Pan and Tilt functions and then set the Zoom
and Focus command.
In Preset Settings, the Zoom and Focus
command is controllable only by the Zoom
command. To switch between Zoom and
Focus, use the Preset 1 and 2 commands as
shown below.
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
58_ functional description
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Preset
Setting
Edit
Home Position OFF
Execute
Clear
Status
Preset Edit
►
Main Menu/Sequence Setting/Preset/Edit
You can edit the 13 preset items such as Pan/Tilt
location, Zoom and Focus, which are selected
among camera functions.
•
PTZ :
Recalls saved locations using the Preset
Settings command.
•
Focus Mode :
Refer to the section entitled Setting Up Your
Camera.
•
Brightness :
Refer to the section entitled Setting Up Your
Camera.
•
Iris :
Refer to the section entitled Setting Up Your
Camera.
•
Back Light :
Refer to the section entitled Setting Up Your
Camera.
•
Day/Night :
Refer to the section entitled Setting Up Your
Camera.
•
Motion Det. :
Refer to the 'Motion Detection'.
•
Scene Adj :
Enables setting the Shutter, AGC, DNR, XDR,
Sens-Up, White Balance, Stabilizer and for
more information about interface terminology,
please refer to the section entitled Setting Up
Your Camera.
Main Menu
Camera Setting
Sequence Setting
....
Sequence Setting
Preset
Swing SEQ
Group SEQ
....
Preset
Setting
Edit
Home Position OFF
Execute
Clear
Status
Preset Edit
Preset = 001* (1~255)
Preset Edit [001]
PTZ 000/-05/X1
Focus Mode ONESHOT
Brightness 32
Iris AUTO
Back Light OFF
Day/Night AUTO
Motion Det.
Scene Adj.
English _ 59
English