Scp-3120Vh - Samsung SCP-3120 User Manual

Installing Your Camera

SCP-3120VH

1. Use the provided L-shaped wrench to loosen 4 screws counter clockwise,
which will help removing the housing.
HOUSING
MAIN-FRAME
SCREW
2. Fix the housing to the NP 1.5" tapped pipe, wall mount (SBP-302W) or ceiling
mount (SBP-302P) by turning it clockwise. For waterproofness and lock
between the two component parts, use the Teflon tape to wrap them around.
PIPE or MOUNT
NP 1.5' TAP
HOUSING
SPEED DOME CAMERA
SCREW
PIPE or MOUNT
HOUSING
40
User Guide
3. Secure the safety wire (attached to the product) to the housing as shown.
(For details about the cable connection, refer to the "Connecting the cables"
section in this manual.)
SAFETY WIRE
4. Arrange the cables inside the housing lest they be damaged or stuck in, and
use the L-shaped wrench to tighten 4 screws to the housing. To ensure
waterproofness, this step needs your special care. Otherwise, the gasket on
the outer side of the product may be loose or just stuck in.
HOUSING
MAIN-FRAME
GASKET
SPEED DOME CAMERA
SAFETY WIRE
SCREW
41
User Guide