Ptz Trace; Auto Run - Samsung SCP-3120 User Manual

Functional Description

14. PTZ Trace

▶ Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Main Menu
Tilt, Zoom and Focus) are memorized and replayed.
Camera Setting
Replay :
Sequence Setting
Replays a route saved by the Trace function. Use the OSD
P/T Setting
button to stop the replay.
OSD Setting
Alarm Setting
Replay Once :
Initialize
Replays a saved Trace route once.
Password Setting
Memorize :
Status
Up to 120 seconds of a memory can be saved. The memory
➡
duration varies depending on the difficulty level of the PTZ
Trace action. As a trace is saved, the remaining capacity of
Sequence Setting
the memory card is displayed. When the memory card is
Preset
full, it turns off with a message, "Mem. Left: 000%", on
Swing SEQ
the screen.
Group SEQ
* Use the OSD On button to pause while saving a trace.
Tour SEQ
(When using the SCC-3100A/SCC-1000 controller)
PTZ Trace
* When Using Different Protocols

Auto Run

Protocol
Power On Resume ON
PELCO-D/P
➡
Samsung-E
PANASONIC
PTZ Trace VICON
HONEYWELL
Trace 1
Trace 2
Trace 3
BOSCH
Trace 4
Clear :
➡
Deletes a saved Trace route.
PTZ Trace 1
Replay
Replay Once
Memorize
Clear
66
SPEED DOME CAMERA
Product Memorize Pause
KBD300A Ack, Iris Open
SCC-5000 OSD On, Iris Open
WV-CU161C OSD ON
V1300X-DVC Iris Open
HTX-3000 Iris Open
AD . OSD On, Iris Open
GE KTD-405 Iris Open
. Iris Open
User Guide
15. Auto Run
▶ Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a certain time,
Main Menu
the sequence operation designated by the user will be
Camera Setting
executed.
Sequence Setting
Mode :
P/T Setting
OSD Setting - Home : Auto run Home Position (Refet to the Preset
Alarm Setting
Menu.)
Initialize
- Preset : Auto run a selected preset number.
Password Setting
- Swing : Auto run a selected Swing mode.
Status
- Group : Auto run a selected Group mode.
➡
- Tour : Auto run a selected Tour mode.
- Trace : Auto run a selected trace mode.
Sequence Setting
- A.Pan : Auto run a 360-degree pan. To activate the
Preset
panning command, you need to set up the
Swing SEQ
camera's tilt angle and auto pan speed manually.
Group SEQ
- Schedule : Schedule a sequencing action by day and time.
Tour SEQ
PTZ Trace
Time :
Auto Run
Enables setting up an Auto Run duration. (The duration can
Power On Resume ON
be 5~60 seconds, or 1~5 minutes.)
➡
Auto Run
Mode OFF
Time 20 SEC
SPEED DOME CAMERA
Refer to the next page.
67
User Guide