Sequence Setting; Preset - Samsung SCP-3120VH User Manual

Functional Description

Sequence Setting

10. Preset

10.1 Preset Location Saving
Main Menu/Sequence Setting/Preset/Setting
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume
Preset
Setting
Edit
Home Position
Execute
Clear
Status
This function enables the memorization of a selected location and
activates the Pan, Tilt, and Zoom functions at that location. Saved
locations can be recalled using the Preset Execute command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a screen as
shown below. Move the joystick in all four directions to
select the desired number. (Only SCC-3100A, SCC-1000)
Preset = 001 (255)
Saving Preset Locations :
Selecting a preset number and pressing the Enter key
redirects the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset Settings, the Zoom and Focus command is
ON
controllable only by the Zoom command. To switch between
Zoom and Focus, use the Preset 1 and 2 commands as
shown below.
Preset Setting
OFF
58
SPEED DOME CAMERA
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
User Guide