Functional Description
16. Schedule
Schedule enables you to schedule a sequencing action by day and time.
Select Day :
Auto Run
At Auto Run, select SCHEDULE to set up each day of the
Mode
SCHEDULE
week, as shown on the side picture. Select a day, change to
Time
30 SEC
ON, and then press Enter.
➡
Select Time :
Schedule Set
When turning ON a day, a timetable appears as shown on the
side picture. (Up to 6 timelines can be selected for a day.)
Sunday
ON
Select the beginning time and sequencing action to schedule
Monday
OFF
the action.
Tuesday
OFF
Wednesday
OFF
Thursday
OFF
Friday
OFF
Saturday
OFF
➡
Schedule Set
No START SEQ
No
1 09:00 HOME
2 00:00 OFF
3 00:00 OFF
4 00:00 OFF
5 00:00 OFF
6 00:00 OFF
Clear
Notes
•
Auto mode is disabled when AGC is turned OFF. This function is only available when Color
or B/W mode is selected. The camera time must be setup properly prior to using this
option. If the camera does not perform a scheduled sequencing action, please reconfigure
thecameratimeunderOSDSetting>Others>ClockSetting(RefertoPage80).
68
SPEED DOME CAMERA
User Guide
17. Power On Resume and MD Dwell Time
▶ Main Menu/Sequence Setting
Power On Resume :
Main Menu
This is useful when the power is disconnected and
Camera Setting
reconnected due to power failures or other power
Sequence Setting
interruptions.
P/T Setting
If the camera was performing a sequence action prior to a
OSD Setting
power disconnection, the camera automatically resumes
Alarm Setting
the action when the power is reconnected.
Initialize
Password Setting
Status
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume
ON
Notes
•
'Power On Resume' cannot resume a sequence action if the camera's internal battery
is completely discharged after the camera was left without power supply for a long
time. (The data of the sequence action, however, remains safe even if the internal
battery is completely discharged.)
SPEED DOME CAMERA
69
User Guide