Table of Contents
Advertisement
Quick Links
MODEL 7020-03
TWO TIER STORAGE
CARRIER
CAUTION
• Inspect unit and all components
for any loosening that may have
occurred during shipping •
IMPORTANT
• DO NOT EXCEED MAXIMUM WEIGHT LIMITS
• SEE BODY PLACEMENT PROCEDURE TO
AVOID INJURY
Mortech™ Manufacturing Inc.
411 North Aerojet Avenue, Azusa, CA 91702
(626) 334-1471 www.mortechmfg.com
™
Technical Users' Manual
Installation and Operating Instructions
ISO Doc. #OM7020-03 (REV B)
JULY 2010
Advertisement
Table of Contents
Related Manuals for MORTECH 7020-03
Summary of Contents for MORTECH 7020-03
- Page 1 ™ Technical Users’ Manual Installation and Operating Instructions MODEL 7020-03 TWO TIER STORAGE CARRIER CAUTION • Inspect unit and all components for any loosening that may have occurred during shipping • IMPORTANT • DO NOT EXCEED MAXIMUM WEIGHT LIMITS • SEE BODY PLACEMENT PROCEDURE TO...
-
Page 2: Safety Information
• Do the moving parts operate smoothly? Modifying the equipment can cause injury and damage. • Is unit draining properly? Use the equipment only as designed by Mortech. • Are all nuts, bolts, and pins secured in place? If unit has an issue contact customer relations. -
Page 3: Parts Listing
Parts listing All measurements in inches SERIES 7020-03 The carrier is fabricated of strong 11 gauge, stainless steel tubing. All sub-assemblies are of welded construction. The subframe shape permits the simple lifting on or off of the operation platform, no mechanical fastening devices are required. - Page 4 ™ ASSEMBLY INSTRUCTIONS FOR MODEL 7020-03 TWO TIER CARRIER FOR T3603 TRAYS Connecting Bar 1/2" Lock Washer 1/2"-13 x 4" Bolt (2) Vertical Uprights (2) Connecting Bars TYPICAL 4 PLACES Rack assembly requires two people. Tools required: 3/4" wrench or socket 1.
- Page 5 7020-03 Two Tier Storage Carrier Parts listing MODEL T3604 The hi-tech operating platform meets all the same design criteria of our Model T3603 with the added bonus of integral slide rails for x-ray cartridges. The slide rails are permanently attached to the underside of the table and will work with all standard size cartridge systems.
-
Page 6: Maintenance
7020-03 Two Tier Storage Carrier Maintenance LEG SUPPORT USE AND CARE FOR CASTERS BRAKE MECHANISM 1. To engage brake mechanism, depress lever. To release (PRESS TO LOCK/UNLOCK) brake mechanism, pull upward or push upward on the top of the locking mechanism. Lever brake mechanisms are located on front wheels 2. -
Page 7: Maintenance Instructions
7020-03 Two Tier Storage Carrier Maintenance MAINTENANCE INSTRUCTIONS Shop Oil and Grease - These soils may be corrosive and may not allow the surface to maintain passivity, and so MAINTENANCE SCHEDULE removal is a necessity. Soap or detergent and water may be The unit requires regular maintenance and follow the used or a combination of detergent and water plus a solvent. -
Page 8: Maintenance Record
Maintenance record 7020-03 Two Tier Storage Carrier MAINTENANCE RECORD Date JULY 2010 MFGISO DOC. #OM7020-03 (REV. B) -
Page 9: Training Record
7020-03 Two Tier Storage Carrier Training record TRAINING RECORD Date JULY 2010 MFGISO DOC. #OM7020-03 (REV. B) -
Page 10: Warranty
Customer Relations. FAX (626) 334-1704 www.mortechmfg.com PROPRIETARY NOTICE info@mortechmfg.com The information in this manual is the property of Mortech © COPYRIGHT MORTECH MANUFACTURING INC., ALL Manufacturing. Mortech Manufacturing reserves all patent RIGHTS RESERVED. rights, proprietary design rights, manufacturing rights,...
Need help?
Do you have a question about the 7020-03 and is the answer not in the manual?
Questions and answers