Advertisement
Quick Links
1.0
Introduction
This manual describes the assembly procedure and handling of the MICRO MOTOR CONNECTOR.
Read this manual thoroughly before assemble/use the connector.
Cautions:
Even when it constructs with the following size depending on the electric wire to be used, it may
become a product performance top problem. Be sure to ask our company operating window
also by trouble in the case of examination of construction connector.
2.0
Application Products
Part No.
2271268-*
3.0
Application Cable
Refer Product specification and Application Specification for details
Wire conductor size: 22-18AWG, 4 strings 18AWG for Power, 2 strings 22AWG for Brake
Cable Jacket Outside diameter: 8.6-9.4mm
4.0
Related Documents
108-137039
: Product specification
114-137039
: Application specification
5.0
Assembly procedure
Assembly the cable in following procedure:
1.
Cable cut process
Cut the cable by appropriate length, see as Fig 1
Cautions:
Use fine tool that keep fine surface after cut the cable
Rev 4
Instruction Sheet
Micro Motor Connector
Descriptions
Micro Motor Connector
Fig. 1
411-137039
10 Dec.2014 Rev A
1 of 8
Advertisement
Related Manuals for TE Connectivity 2271268 Series
Summary of Contents for TE Connectivity 2271268 Series
- Page 1 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Introduction This manual describes the assembly procedure and handling of the MICRO MOTOR CONNECTOR. Read this manual thoroughly before assemble/use the connector. Cautions: Even when it constructs with the following size depending on the electric wire to be used, it may become a product performance top problem.
- Page 2 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Insert accessories in accordance with Fig. 2 to the cable. Cautions: Take care about the passed order and direction about the accessory Fig.2 Cable end process Strip the jacket without damage to the braided shield, if the cable have. Fig3-1 Fig.
- Page 3 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Cut all around the bended braided shield without damage to the cable .Fig. 3-3 Fig.3-3 A copper foil or aluminum foil tape with conductivity adhensive with a width of 5 mm is twisted ø...
- Page 4 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Fig. 5-2 Fig. 5-3 Strip the core wire. Fig.6 Strip length :1.8±0.2mm Fig. 6 Refer to the Application Specification (114-137039), Crimp contact to the wire. After crimping, check the workmanship in accordance with the application specification, Fig 7 Rev 4 4 of 8...
- Page 5 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Fig 7 Verifying Rec.(Plug) housing orientation by finished product cable direction. First insert inner row cable(4-18AWG), and then insert far row cable(2-22AWG ). Fig8 Fig. 8 Crimp the ground-clip Please ignore this step if the cable have no braided shield. Put the Rec.
- Page 6 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Fig. 10 When a ground clip interferes of the position of Fig.11 and continuation of picture in is difficult. Push a ground-clip lightly without deform and pull in several times Cautions: When the ground-clip is bent, please modify it to regular position.
- Page 7 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Please shift cable sealing, cable clamp in the position of Fig 13-1, Bind a wire fixed set screw tight, and fix a cable to outer housing. Under the present condition, please bind tight so that there is no gap between outer housing and screw.Fig13-2 Cautions Please confirm the cable is fixed.
- Page 8 Instruction Sheet 411-137039 Micro Motor Connector 10 Dec.2014 Rev A Fig15-1 Fig 15-2 Rev 4 8 of 8...
Need help?
Do you have a question about the 2271268 Series and is the answer not in the manual?
Questions and answers