Table of Contents
Advertisement
Try out the sounds
■ Selecting patches while listening to phrases
(Patch Audition)
Without playing keyboards, you can audition the sounds using phrases that have
been pre-programmed to be suitable for the character of each patch.
fig.q04-03
1.
While holding down [SHIFT], press [NUMERIC].
The currently selected patch will begin sounding.
2.
Select patches as described in Selecting a patch by category (p. 24).
3.
Press [EXIT] to stop the patch audition.
Selecting a rhythm set
The RS-70 provides rhythm sets that let you play different percussion instrument
sounds or special effects from each key.
fig.q04-04
1
2
1.
Press [PATCH] so it is lit and you are in Patch mode.
2.
Press [0] to select "RHYTHM & SFX."
3.
Use VALUE [-]/[+] to switch rhythm sets.
There are patches other than rhythm sets in the Rhythm & SFX category group.
Rhythm sets have "Kit," "Menu," or "GM2" in their names.
26
1
3
3
With [0] pressed, you can
turn [NUMERIC] on and
use the [0]–[9] buttons to
input a rhythm set number
directly. Press [ENTER] to
finalize the number (p. 54).
Rhythm Set List (p. 178)
Advertisement
Table of Contents
