Roland RS-70 Owner's Manual page 97

07: AUTO WAH
The Auto Wah cyclically controls a filter to create cyclic change in
timbre.
fig.MFX-07
L in
Auto Wah
R in
Parameter Value
Filter Type LPF, BPF
Rate # 0.05–10.00 [Hz] Adjusts the frequency of the
Depth 0–127
Sens 0–127
Manual # 0–127
Peak 0–127
Level 0–127
08: ROTARY
The Rotary effect simulates the sound of the rotary speakers often
used with the electric organs of the past.
Since the movement of the high range and low range rotors can be
set independently, the unique type of modulation characteristic of
these speakers can be simulated quite closely. This effect is most
suitable for electric organ Patches.
fig.MFX-08
L in
Rotary
R in
Parameter Value
High Slow 0.05–10.00 [Hz] Adjusts the slow speed (SLOW)
Low Slow 0.05–10.00 [Hz] Adjusts the slow speed (SLOW)
High Fast 0.05–10.00 [Hz] Adjusts the fast speed (FAST) of
Low Fast 0.05–10.00 [Hz] Adjusts the fast speed (FAST) of
L out
R out
Description
Selects the type of filter.
LPF: The wah effect will be ap-
plied over a wide frequency
range.
BPF: The wah effect will be ap-
plied over a narrow frequency
range.
modulation.
Adjusts the depth of the modu-
lation.
Adjusts the sensitivity with
which the filter is controlled.
Adjusts the center frequency
from which the effect is applied.
Adjusts the amount of the wah
effect that will occur in the area
of the center frequency. Lower
settings will cause the effect to
be applied in a broad area
around the center frequency.
Higher settings will cause the ef-
fect to be applied in a more nar-
row range.
Adjusts the output level.
L out
R out
Description
of the high frequency rotor.
of the low frequency rotor.
the high frequency rotor.
the low frequency rotor.
Parameter Value
Speed # SLOW, FAST
High Accel 0–15
Low Accel 0–15
High Level 0–127
Low Level 0–127
Separation 0–127
Level # 0–127
09: COMPRESSOR
The compressor flattens out high levels and boosts low levels,
smoothing out unevenness in volume.
fig.MFX-09
L in
Compressor
R in
Parameter Value
Sustain 0–127
Attack 0–127
Pan # L64–63R
Post Gain 0, +6, +12, +18
[dB]
Low Gain -15– +15 [dB]
High Gain -15– +15 [dB]
Level # 0–127
Adding effects
Description
Simultaneously switch the rota-
tional speed of the low frequen-
cy rotor and high frequency
rotor.
SLOW: Slows down the rotation
to the specified speed (the Low
Slow/Hi Slow values).
FAST: Speeds up the rotation to
the specified speed (the Low
Fast/Hi Fast values).
* When you want to use the ped-
al switch to switch the Rotary ro-
tation speed, select MFX
PARAMETER1 in Pedal Control
Assign (p. 126).
Adjusts the time it takes the high
frequency rotor to reach the
newly selected speed when
switching from fast to slow (or
slow to fast) speed.
Lower values will require long-
er times.
Adjusts the time it takes the low
frequency rotor to reach the
newly selected speed when
switching from fast to slow (or
slow to fast) speed.
Lower values will require longer
times.
Adjusts the volume of the high
frequency rotor.
Adjusts the volume of the low
frequency rotor.
Adjusts the spatial dispersion of
the sound.
Adjusts the output level.
L out
Pan L
2-Band
EQ
Pan R
R out
Description
Adjusts the time over which low
level sounds are boosted until
they reach the specified volume.
Adjusts the attack time of an in-
put sound.
Adjusts the stereo location of the
output sound.
L64 is far left, 0 is center, and
63R is far right.
Adjusts the output gain.
Adjusts the gain of the low fre-
quency.
Adjusts the gain of the high fre-
quency.
Adjusts the output level.
97