Roland RS-70 Owner's Manual page 146

Performing with a computer
fig.Win-19.e
14.
The Insert Disk dialog box will appear.
Click [OK].
fig.Win-20.e
15.
The Files Needed dialog box will
appear.
In the "Copy files from" area, type
"E:\Win2000\RS-70" and click [OK].
* The drive name "E:" may be different
for your system. Specify the drive name
of your CD-ROM drive.
fig.Win-21.e
16.
The "Found New Hardware Wizard" may
be displayed.
Verify that "Roland RS-70" is displayed,
and click [Finish].
17.
The System Settings Change dialog box
may appear. Click [Yes].
Windows will restart automatically.
If you changed "File signature verification"
If you changed the "File signature verification" setting in step 5, restore the
original setting after Windows restarts.
1. After Windows restarts, log on to Windows as a user with administrative
privileges, (such as Administrator).
2. Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel.
3. In Control Panel, double-click the System icon to open the System
Properties dialog box.
4. Click the Hardware tab, and then click [Driver signature]. The Driver Signing
Options dialog box will appear.
5. Return the "File signature verification" setting to the original setting (either
"Warn" or "Block"), and click [OK].
6. Click [OK]. The System properties dialog box will close.
Next, you need to make the driver settings.
146
→ Settings and checking (p. 148)
The Insert Disk dialog may
not appear. In that case,
proceed to step 15.