Reception Modes; How To Select The Reception Mode; Manual Receive - Ricoh fax3900l User Manual

Smt4EN-BasicNIC-F_FM.book Page 22 Thursday, September 14, 2000 7:56 PM
Faxing

Reception Modes

The machine can treat incoming fax
documents and telephone calls in two
ways.

Manual Receive

2
Use this mode if your line is shared
by a fax machine and a telephone
but you wish to answer all calls
yourself and decide whether they
are fax documents or telephone
calls. You must manually hit the
{Start} key to receive a fax.
The machine will ring continuous-
ly until you answer the call, so you
have to be near the machine at all
times. The Manual Receive indica-
tor is lit when the machine is in this
mode.
Auto Receive
Use this mode if you have a dedi-
cated fax line. The machine as-
sumes all calls are fax documents.
It will ring once to alert you of an
incoming call, and then starts re-
ceiving.
Reference
To receive Internet Fax documents,
see Chapter 2, "Reception" in the
NIC FAX KIT manual.
22
How to Select the Reception
Mode
The Manual Receive indicator is lit
when the machine is in Manual Re-
ceive mode. To switch to a different
mode, follow the steps below.
A
Press the {Reception Mode} key.
Reception Mode hi/OK
[Auto Sense]
B
Press 0 or 1 to select the recep-
tion mode.
Reception Mode hi/OK
Manual Receive
C
Press the {OK} key.
Ready 100% 02:39PM
Set Orig./ Enter No.