Operation Panel - Ricoh fax3900l User Manual

Smt4EN-BasicNIC-F_FM.book Page 5 Thursday, September 14, 2000 7:56 PM

Operation Panel

ZCKS012N.eps
Mail Addr.
1.
Add Toner indicator
Blinks when toner is about to run out and
lights continuously when toner has run
out.
2.
Add Paper indicator
Lights when a cassette is empty or the pa-
per cassette is not fully inserted.
3.
Receive File indicator
Lights when an incoming document is re-
ceived into memory, and flashes when
confidential or memory-locked docu-
ment is received. (See P.53 "If an Indicator
Lights on the Operation Panel").
4.
User Function keys
There are four User Function keys.
Four User Function keys are provided to
store frequently used functions and oper-
ations.
The following functions are registered by
default:
Mail RX
Key Function
F1 Prints a transmission management
report.
F2 Initiates entry of an E-mail ad-
dress.
F3 Immediately checks for and re-
ceives any incoming E-mail.
F4 Switches stamping off/on.
5. {Resolution} key
Selects the scanning resolution or the
halftone scanning mode. When the Detail
mode, Fine mode, or Halftone mode is se-
lected, the corresponding indicator
lights. Standard mode is selected when
no indicator is lit.
The Detail and Fine modes offer progres-
sively higher scanning resolutions. The
Halftone mode is used for faxing photo-
graphs or drawings that contain half-
tones.
Operation Panel
1
5