Canceling A Memory Transmission - Ricoh fax3900l User Manual

Shm4ENfaxF.book Page 13 Wednesday, September 13, 2000 3:13 PM
G
Press the {OK} key to enter anoth-
er fax number.
Note
Repeat steps F and G until all
destinations are entered.
If you enter only one destina-
tion, press the {Start} key.
The machine stores your mes-
sage and dials the first number
(or, if you selected Send Later, it
will return to standby mode and
the fax document will be sent at
the time that you selected).
H
Press the {Start} key.
The machine dials the other party's
number.
Note
If the other party's line is busy,
your machine will redial.
If the other party's fax machine an-
swers, both machines connect and
your machine sends the document.
The other party's Own Name or Own
Fax Number appears on the upper line.
If your line goes through a local
switchboard (a PBX) remember to
dial the exit code. Press the {Pause}
key immediately after the code. If
the number includes a country
code, press the {Pause} key after the
country code, and then dial the rest
of the number. Pauses are dis-
played as a dash (-) on the display.
The File number. is used for managing
documents in memory, and is required
when canceling transmission of a doc-
ument or printing out its contents.
Memory Transmission and Immediate Transmission
Canceling a Memory
Transmission
kkkkkkkkk
Before the { Start } key is pressed
A
While the document is being scanned in
A
During transmission
A
B
C
Press the {Stop} key or {Clear Modes}
key, or remove the document set in
the feeder.
Press the {Stop} key.
All parts of the document that
have been scanned in are cleared.
Confirm and press the {OK} key.
Confirm the destination.
The destination name or fax num-
ber for the current transmission is
displayed.
Press the {Stop} key.
Confirm and press the {OK} key.
Transmission is canceled.
2
hi
13