Ricoh fax3900l User Manual page 7

8.
The name you just entered for Own Name
flashes in the Header display.
In the USA, law requires that the telephone
number of your fax machine be included in
your fax header.
Header[ABC] OK
ABC COMPANY
If you want to use the Own Name entry for the
Header entry, just press the [OK] key.
If you want to enter a different name for the
Header, use the A~Z keys to enter another name,
and then press the [OK] key.
Reference
TFor details, see Chapter 3, "Initial Settings and
Adjustments" in the Basic Features manual.
T Also see Chapter 3, "Entering Characters" in the
Basic Features Manual.
9.
Use the number keys to enter your fax
number as it must be dialed from outside
the United States. (You cannot enter
pauses.)
Fax Number OK
+11234567890
Note
T The format of the number is normally as follows:
International Dial Prefix, Your County Code, Your
Area Code, then you must add a Pause, followed
by your telephone number. Check the International
Dialing Prefix and the Country Code with your lo-
cal telecommunications operator. The example
shown is for the United States; the codes to add are
1.
10.
Press the [OK] key.
"Initial Setup Completed" will flash briefly
in the display.
Ready 100% 4:55AM
Set Orig./ Enter No.
SCHMIDT4_EN.pm6 6
After Initial Settings
You can check and adjust these settings.
T To change the date and time, see Chapter 6, "Set-
ting the Date and Time" in the Advanced Features
manual.
T To change the line type, see Chapter 7, "Line Type"
in the Advanced Features manual.
T To change your own name, fax header, and fax
number settings, see Chapter 3, "Initial Settings and
Adjustments" in the Basic Features manual.
Reference
TSee Chapter 10, "Installation" in the Advanced
Features manual for further information regarding
installation.
T If you are using NIC FAX, you will need to con-
nect a LAN cable and make network settings. See
Chapter 1 in the NIC FAX KIT manual.
9/18/00, 1:29 PM
Please keep this manual and any leftover
parts in a safe place.
6