Ricoh Aficio SPC222SF User Manual page 133

D
Search for the desired destination by entering the destination name using
the number keys, and then press the {OK} key.
The screen changes to show the names that match the characters you enter.
E
Press the {B&W Start} key or the {Color Start} key.
To scan in black and white, press the {B&W Start} key.
To scan in color, press the {Color Start} key.
Depending on the machine's settings, you may be prompted to place another
original on the exposure glass. In this case, proceed to the next step.
F
If you have more originals to scan, place the next original on the exposure
glass, and then press {1}. Repeat this step until all originals are scanned.
G
When all originals have been scanned, press {2} to start sending the
scanned file.
Note
❒ To cancel scanning, press the {Clear/Stop} key. The scan files are discarded.
❒ You can also specify a destination using the One Touch buttons or
{Pause/Redial} key.
❒ If the [Limitless Scan] setting under [Scan Settings] is enabled, you can place
originals on the exposure glass repeatedly in a single scan procedure.
❒ If the [Multi Page in A Document] setting under [Scan Settings] is enabled, you
can scan multiple pages to create a single PDF or TIFF file containing all
pages. However, if the file format is JPEG, a single-page file will be created
for every page scanned.
❒ If paper is jammed in the ADF, the scan file is discarded. In this case, scan
the entire originals again. To remove paper jams in the ADF, see p.228 "Re-
moving Scanning Jams".
BAA005S
Scanning Using the Control Panel
5
125