Host Interface; Network Setup - Ricoh Aficio AP4510 Setup Manual

Configuring the Printer for the Network
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Net-
work Setup".

Host Interface:

Network Setup

E E E E
Press { { { { Enter #} } } } .
The following message appears on
the panel display.
3
Network Setup:
IP Address
F F F F
Select the protocol you want to
use.
Note
❒ Do not select protocols that are
not used on your network.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Active Protocol".
Network Setup:
Active Protocol
B Press { { { { Enter #} } } } .
The current setting appears on
the panel display.
Active Protocol:
TCP/IP
C Set other protocols you need to
set in the same way.
Note
❒ Leave unused protocols "Not
Active".
G G G G
If you use TCP/IP, you should as-
sign the IP address to the printer.
Note
❒ To get the IP address for the
printer, contact your network
administrator.
32
A Press { { { { U U U U } } } } or { { { { T T T T } } } } until the fol-
lowing message appears.
Network Setup:
IP Address
B Press { { { { Enter #} } } } .
The current IP address appears
on the panel display.
IP Address:
011.022.033.044
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the left
most entry field of the IP address.
IP Address:
192.022.033.044
D Press { { { { Enter #} } } } .
The pointer (k) moves to the
next entry field automatically.
IP Address:
192.02k.033.044
Note
❒ You can return the pointer
(k) to the previous (left) entry
field by pressing { { { { Escape} } } } .
❒ If you press { { { { Escape} } } } when
the pointer (k) is on the left-
most position, the selected IP
address is reset.
E Repeat steps C C C C and D D D D to enter
the IP address.
IP Address:
192.168.000.011
Check if the pointer (k) is at the
rightmost position, and press
{ { { { Enter #} } } } to register the IP ad-
dress you selected.
Network Setup:
IP Address