Program Playback - RCA RC5910P User Manual

Program Playback

Program playback lets you set up a specific order for VCD playback.
1. With a disc inserted, but not playing, press PLAY MODE. "Reading
disc information, please wait" appears on the screen. When the
player is finished reading the discs, the PLAY MODE screen
appears.
Note: It's normal for the player to take a while to read the disc
information.
2. On the screen, each disc is identified by it's type beside the slot
number it occupies. Press DISC (several times if necessary) to
highlight the first disc from which you want to select tracks to
program. The selected disc's track numbers appear in the Track
box.
Note: If "– – –" is shown rather than a disc type, there is no disc in the slot.
3. Use the right and left arrow buttons to highlight the first track to
add to the program and press OK. The selected tracks appears in
the Program Order box.
4. Repeat Step 3 for each tracks to add to the program from the
selected disc. Repeat Steps 2-4 to add tracks from other discs. Up
to 20 tracks may be programmed at once.
5. Press PLAY to begin playing the program.
Note:
• To resume normal playback, press CLEAR and then press PLAY.
Deleting Programmed Chapters
• To remove the last track that was added to the program, press
CLEAR. Each subsequent press of CLEAR deletes the next track in
the opposite order the tracks were programmed.
• To remove all of the tracks from the program, hold down CLEAR.
• All programmed tracks are deleted when the disc is removed or
the DVD player is turned off.
Playing Video CDs
59