Choosing A Connection - RCA RC5910P User Manual

Choosing a Connection

The following pages show examples of connections commonly used
to connect the DVD player with a TV and other components. Refer to
your TV, VCR, or Dolby Digital Receiver owner's manual for more
information on hooking up your specific components.
DVD Player + TV without A/V Input Jacks ...... 8
If your television only has antenna (RF) inputs, you will need to get
an RF modulator and A/V cable "Y" adapter (not included) in order to
connect the DVD player.
DVD Player + TV with A/V Input Jacks
(and/or S-Video) ............................................... 9
If your television has A/V input jacks use them to connect your DVD
for better quality picture and sound. (For the best quality picture, use
the S-Video input if your television has one.)
DVD Player + Stereo Amplifier/Receiver
+ TV ................................................................. 10
If your television has an S-Video input, and you have a Dolby Digital
Receiver (with a digital optical-type input jack), use this connection to
get the best quality picture and sound.
DVD Player + TV + VCR .................................. 11
If you want to include a VCR in your connection scheme, this shows
you one possible connection.
DVD Player + TV + VCR
+ Satellite Receiver ........................................ 12
If you want to include a VCR and a satellite receiver in your
connection scheme, this shows you one possible connection.
Finishing the Connection
After you have connected all of the components, you will
need to attach the power cord, and set the on-screen menu language.
Setup and Connections
Don't Forget to Plug It In
After you've connected the components, don't
forget to plug in the DVD player. Details at the
end of this section.
7