Changing The Audio Language; Changing The Camera Angle - RCA RC5910P User Manual

Changing the Audio Language

When a DVD is recorded with multiple soundtracks, you can use the
Audio Language feature to temporarily change the initialized audio
language and audio output.
1. During disc playback, press AUDIO on the remote.
2. Use the up and down arrow buttons to select an audio language
from the list.
3. Press AUDIO to accept the audio language changes and turn off
the Audio Language banner.
• Press CLEAR to remove the audio information without making
changes.
Notes:
• When the player is turned on, the initialized audio language and
audio output is selected. If the disc does not contain this
language, the "default" language is automatically selected.
• This feature is disc-dependent, and may not work with all DVDs.
• If the disc was created with audio languages that are not available
in the audio languages menu, the additional languages will
appear here.

Changing the Camera Angle

Some DVDs contain multiple angles of a particular scene or sequence.
To indicate that multiple angles are available, a camera icon appears
on the screen or on the DVD front display panel (see Front Panel
Display information on page 63).
1. During disc playback, press ANGLE on the remote.
2. Use the up and down arrow buttons to select a camera angle.
3. Press ANGLE to accept the camera angle you selected and turn off
the Angle banner.
• Press CLEAR to remove the camera angle information without
making changes.
Note:
• This feature does not work when a DVD has not been recorded
with a multi-camera angle system.
Playing DVDs
The audio output may vary depending on the
DVD. Some examples of audio output are
Dolby Digital 5.1 Channel and Dolby Digital 2
Channel.
CAUTION
If the on-screen messages are turned off, the
Camera icon will not appear to let you know
that multiple angles are available.
31