Dvd Player + Tv Without A/V Input Jacks - RCA RC5910P User Manual

Setup and Connections

DVD Player + TV without A/V Input Jacks

(Good Picture and Mono Sound Quality)
TV (BACK PANEL)
RF MODULATOR
(not included)
VIDEO
AUDIO (L)
"Y" ADAPTER
DVD PLAYER (not included)
OPTICAL COAXIAL
DIGITAL AUDIO OUT
To Connect the DVD Player
If you do not have audio/video input jacks on your television, you
need to use an RF modulator and A/V cable "Y" adapter (not
included).
1. Connect the "Y" adapter to the DVD player's ANALOG AUDIO
OUT L & R jacks, and a standard A/V cable to the VIDEO OUT
jack.
2. Connect the other ends of the cable and adapter to the
corresponding inputs on the RF modulator.
3. Connect the off-air antenna or your cable signal to the antenna
input on the RF modulator (if it has one).
4. Connect the output from the modulator to the antenna input on
your television.
To Watch DVD
Tune your television to RF modulator output channel (the modulator
should have a CH 3/4 switch to indicate the output channel).
NOTE:
• You may need to adjust the A/B switch on the RF modulator to
watch television programming.
8
ANT IN
RF OUT
ANT IN
CABLE OR OFF-AIR SIGNAL
R1 L1 V1 Pr Y
R2 L2 V2
Pb
ANALOG AUDIO OUT VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT
CAUTION
Do not stack electronic components or other
objects on top of the DVD player. See Safety
Information, inside front cover.
Consult the owner's manuals of the additional
components you are connecting for more
detailed connection information for those
particular components.