Types Of Discs That The Player Can Play; Prepare To Connect The Dvd Player - RCA RC5910P User Manual

Types of Discs That the Player Can
Play
This DVD player is capable of playing the following types of discs,
having the corresponding logos:
• DVDs
• Audio CDs
• Video CDs
VIDEO CD

Prepare to Connect the DVD Player

Before you connect your DVD player, there are a few things that you
need to know.
Protect Your Components from Power
Surges
• Connect all components before plugging any power cords into the
wall outlet.
• Always turn off the DVD player, TV, and other components before
you connect or disconnect any cables.
Position Cables Correctly to Avoid Audio
Hum or Interference
• Insert all cable plugs firmly into their jacks.
• Place the audio/video cables to the sides of the TV's back panel
instead of straight down the middle after you connect your
components.
• Try not to coil any twin-lead cables and keep them away from the
audio/video cables as much as possible.
• Make sure all antennas and cables are properly grounded.
Setup and Connections
DO NOT Use CD-R Discs!
The wave length of the pickup of this DVD
player may cause CD-R discs to be erased. DO
NOT play CD-R discs in this player!
CAUTION
Protect your components from overheating.
• Do not stack electronic components or
other objects on top of the DVD player.
• Do not block ventilation holes in any of the
components. Arrange the components so
that air can circulate freely.
• Allow adequate ventilation when placing
your components in a stand.
See Safety Information, inside front cover.
5