Using Soundstation Placing A Call; Ip 4000 Sip; Answering A Call - Polycom SoundStation IP 4000 User Manual

Using SoundStation
Placing a Call
1. To obtain dial tone, press the
key or the New Call soft key.
2. Dial the desired number,
OR
Dial by SIP URL or IP
• After obtaining dial tone press Name
• Enter URL or IP (press * for "." and # for "@")
• Press Send to complete the call.
Users also have the option to dial directly
from the dial pad without first getting dial
tone. Simply enter the number then press the
key or press the Dial soft key.
In all cases, the active call will appear on the
display showing call duration and destination.
†
Examples: 10.3.0.42
joe@205.173.1.24
sip: jane@polycom.com

Answering a Call

key or the Answer soft
Press the
key. The three LEDs will blink green
when the phone rings.
If there is an active call when a new incoming
call is received, pressing the Answer soft key
places the active call on hold to answer the
new call.

IP 4000 SIP

®
†
address:
To obtain the IP address of your phone,
press
General. The IP address is listed together with
other network information.
4
followed by
When a second call comes in, the soft
keys don't change. Press the up and
down arrow keys to access the soft
keys for the second incoming call.
Incoming calls may be ignored
by pressing the Reject soft key.
System Status and