Daikin MicroTech MT2300 Operation Manual page 3

SAfETy INfORMATION
Safety Information
Hazard Identification
DANGER
Danger indicates a hazardous situation, which will result in death or serious
injury if not avoided.
WARNING
Warning indicates a potentially hazardous situations, which can result in
property damage, personal injury, or death if not avoided.
CAUTION
Caution indicates a potentially hazardous situations, which can result in minor
injury or equipment damage if not avoided.
NOTICE
Notice indicates practices not related to physical injury.
NOTE: Indicates important details or clarifying statements for
information presented in Figures or Tables.
Safety Considerations
This manual provides installation, operation, and maintenance
information for a Daikin Applied MicroTech 2300 Unit Controller.
NOTICE
Installation and maintenance are to be performed only by licensed, if required
by local codes and regulations, or qualified personnel who are familiar with
local codes and regulations and are experienced with this type of equipment.
DANGER
LOCKOUT/TAGOUT all power sources prior to service, pressurizing, de-
pressuring, or powering down the unit. Failure to follow this warning exactly can
result in serious injury or death. Disconnect electrical power before servicing
the equipment. More than one disconnect may be required to denergize the
unit. Be sure to read and understand the installation, operation, and service
instructions within this manual.
WARNING
Electric shock hazard. Improper handling of this equipment can cause personal
injury or equipment damage. This equipment must be properly grounded.
Connections to and service of the MicroTech control panel must be performed
only by personnel that are knowledgeable in the operation of the equipment
being controlled.
CAUTION
Static sensitive components. A static discharge while handling electronic circuit
boards can cause damage to the components. Discharge any static electrical
charge by touching the bare metal inside the control panel before performing
any service work. Never unplug any cables, circuit board terminal blocks, or
power plugs while power is applied to the panel.
OM 1364-1
Introduction
This operation manual covers the MT2300 unit controller and
MT2310 I/O expansion board for Daikin Water Source Heat
Pumps.
For information on BACnet
®
• IM 1363 - MicroTech MT2300 Water Source Heat Pump
Unit Controller BACnet MS/TP Network Integration
• ED 19129 - MicroTech MT2300 Water Source Heat Pump
Unit Controller BACnet Protocol Information
For information on the MT6210 A2L Mitigation controller see:
• IM 1365 - MT6210 Leak Mitigation Controller for Units
Equipped with A2L Refrigerant
3
communication modules see:
WWW.DAIKINAPPLIED.COM