Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies IMC-P21A-G2 Series
Summary of Contents for Moxa Technologies IMC-P21A-G2 Series
- Page 1 IMC-P21A-G2 Series Quick Installation Guide Moxa Industrial Media Converter Version 1.1, August 2024 Technical Support Contact Information www.moxa.com/support 2024 Moxa Inc. All rights reserved. P/N: 1802000210122 *1802000210122*...
-
Page 2: Package Checklist
(PD), eliminating the need for additional wiring. It supports IEEE 802.3/802.3u/802.3x with 10/100M and MDI/MDI-X auto-sensing to provide a total solution for your industrial Ethernet network. Package Checklist The following items come with the IMC-P21A-G2 Series when we ship • Moxa PoE+ Fast Ethernet-to-fiber media converters •... - Page 3 Panel Layout of the IMC-P21A-G2 Series Front Panel View (IMC-P21A-G2-M-SC) 1. Terminal block for power input PWR1/PWR2 2. Power input PWR1 LED 3. Power input PWR2 LED 4. Smart PoE LED indicator of PoE+ port 5. Fiber Link/Active LED 6. 10/100Mbps copper port LED 7.
-
Page 4: Mounting Dimensions (Unit = Mm)
DIN-rail Mounting The metal DIN-rail mounting kit in the package is fixed to the back panel of the IMC-P21A-G2 Series. Mount the IMC-P21A-G2 Series on a corrosion-free mounting rail that adheres to the EN 60715 standard. NOTE The length of the screws used for the DIN-rail mount bracket: 6 mm;... -
Page 5: Wall Mounting (Optional)
M3 screws. STEP 2: Mounting the IMC- P21A-G2 Series on the wall requires two M3 screws. Use the IMC-P21A-G2 Series with the wall-mount plates attached as a guide to mark the correct location of the two screws. Grounding the IMC-P21A-G2 Series Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). -
Page 6: Redundant Power Inputs
IMC-P21A-G2’s power needs. Communication Connections RJ45 Ethernet Port Connection The IMC-P21A-G2 Series has one 10/100BaseT(X) Ethernet port on the front panel for connecting to Ethernet-enabled devices. Pinouts and cable wiring diagrams for both MDI (NIC-type) and MDI-X... -
Page 7: Dip Switch Setting
All you need to remember is to connect the Tx (transmit) port of device I to the Rx (receive) port of device II, and the Rx (receive) port of device I to the Tx (transmit) port of device II. If you make your own cables, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, as shown below, or A1-to-A2 and B1- to-B2). -
Page 8: Led Indicators
Switch Function State Description Name Enables PoE; the PoE converter provides (Default) power to PD. Disables PoE; the PoE converter does NOT provide power to PD. Enables the P.R.R. function when the fiber port link is down for 3 seconds and the PoE setting is enabled (On status);... -
Page 9: Specifications
Specifications Technology Standards IEEE802.3, 802.3u, Link Fault Pass-through (LFPT), IEEE802.3at, IEEE802.3af Interface RJ45 Ports 10/100BaseT(X) Fiber Ports 100Base-FX (SC, ST connectors available) LED Indicators Power, Ethernet, Fiber, PoE Dip Switch LFPT, Operating Mode, Force TP Speed, PoE, P.R.R Optical Fiber Multi-mode Single-mode Distance, km... - Page 10 Caution • This is a Class 1 (IEC 60825:2014) laser/LED product. Do not stare into the laser beam. 1. Caution—Use of the controls or adjustments or the performance of procedures other than those specified herein may cause hazardous radiation exposure. 2.
Need help?
Do you have a question about the IMC-P21A-G2 Series and is the answer not in the manual?
Questions and answers