Anest Iwata WS-PRIMER Cleaning Procedure page 5

2
Clean the body surface.
5. CLEANING OF THE ATOMIZING PARTS
1
Clean the lateral holes in the nozzle using
the Tiny Twisted Brush (ø 3 mm).
3
Clean the slits of the fluid nozzle using the
Brush in Bamboo.
3
Dry the spray gun with the Blow Gun
AG-6.
2
Clean the central hole of the nozzle using
the Tiny Twisted Brush (ø 3 mm).
4
Dry the slits of the nozzle with the Blow
Gun AG-6.