Anest Iwata WS-PRIMER Cleaning Procedure page 2

Daily cleaning of the spray gun, performed after each use, is a crucial aspect of a painter's
professionalism. This routine ensures the equipment's optimal performance and long-term
durability.
ANEST IWATA offers effective cleaning tools in its kits, featuring solvent-resistant brushes,
twisted brushes, and cleaning needles suitable for all types of spray guns.
Throughout the cleaning process, prioritize safety by wearing ANEST IWATA safety glasses,
masks, and gloves.
WEAR PROTECTIVE GEARS
IMPORTANT!
During all fases cleaning procedures, always wear proper body and respiratory pro-
tection such as: ANEST IWATA safety glasses, mask and gloves.
1 . PRELIMINARY WASHING
1
Drain remaining paint from the gravity cup
into a suitable container and clean the cup
with a dry cloth.
2
Pour the cleaner into the gravity cup, leave
it to act for a few seconds and carry out a
preliminary wash to remove any excess of
residual paint.