Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Anest Iwata Manuals
  4. Paint Sprayer
  5. WS-PRIMER
  6. Cleaning procedure

Anest Iwata WS-PRIMER Cleaning Procedure

Hide thumbs Also See for WS-PRIMER:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
WS-PRIMER
MANUAL CLEANING
PROCEDURE
a good start is halfway to success.

Advertisement

loading
Need help?

Need help?

Do you have a question about the WS-PRIMER and is the answer not in the manual?

Questions and answers

Related Manuals for Anest Iwata WS-PRIMER

Summary of Contents for Anest Iwata WS-PRIMER

  • Page 1 WS-PRIMER MANUAL CLEANING PROCEDURE a good start is halfway to success.
  • Page 2 This routine ensures the equipment’s optimal performance and long-term durability. ANEST IWATA offers effective cleaning tools in its kits, featuring solvent-resistant brushes, twisted brushes, and cleaning needles suitable for all types of spray guns. Throughout the cleaning process, prioritize safety by wearing ANEST IWATA safety glasses, masks, and gloves.
  • Page 3 Drain the dirty cleaner from the gun and from the gravity cup, into a suitable continer. Repeat the procedure until the cup is perfectly clean and wipe it with dry cloth, then proceed with cleaning of all other parts. 2 . DETACHING BEFORE CLEANING The pressure gauge must always be detached from the gun handle before cleaning to prevent permanent damage.
  • Page 4 3. DISSASSEMBLING OF ATOMIZING PARTS Remove the air cap. Unscrew the fluid adjustment knob by hand and take it off togheter with the spring. Pull out the fluid needle. Remove the fluid nozzle utilizing the included Spanner. 4. GUN BODY CLEANING PROCEDURE Clean the fluid ports using the Twisted Brush (ø...
  • Page 5 Clean the body surface. Dry the spray gun with the Blow Gun AG-6. 5. CLEANING OF THE ATOMIZING PARTS Clean the lateral holes in the nozzle using Clean the central hole of the nozzle using the Tiny Twisted Brush (ø 3 mm). the Tiny Twisted Brush (ø...
  • Page 6 Clean the threads of the fluid nozzle using Clean the fluid nozzle inside, using the the Brush in Bamboo. Twisted Brush (ø 10 mm). Dry the threads of the nozzle with the Blow Clean the fluid needle using a big brush. Gun AG-6.
  • Page 7 Clean the inner horn holes, and blow Clean the tiny holes right next to the dry air cap once finished. central hole of the air cap using a proper Cleaning Needle. Blow dry the tiny holes right next to the central hole of the air cap.
  • Page 8 Get help with ANEST IWATA SUPPORT www.anest-iwata-coating.com/support/...