Advanced (Recording pictures)
Adjusting each Film Mode to the desired setting
Touch the item.
Touch the slide bar.
•
Registered settings are memorized even if the
camera is turned off.
Touch [MEMORY].
Touch [MY FILM 1] or [MY FILM 2].
•
You can register 2 settings. ([MY FILM 1] and
[MY FILM 2])
(After registering, the Film Mode name that was
registered previously is displayed.)
•
[STANDARD] is registered in [MY FILM 1] and
[MY FILM 2] at the time of purchase.
Touch [SET].
•
You can also press the shutter button halfway to set.
Item
[CONTRAST]
[SHARPNESS]
S
[SATURATION]
[NOISE
REDUCTION]
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except [NOISE
REDUCTION] towards [`] to take pictures.
•
If you adjust a Film Mode, [_] is displayed beside the Film Mode icon on the screen.
•
You cannot adjust [SATURATION] in the black and white settings in Film Mode.
•
Film Mode cannot be adjusted in the Intelligent Auto Mode, Advanced Scene Mode and Scene
Mode.
92
VQT2S30
Increases the difference between the brightness and the
[r]
darkness in the picture.
Decreases the difference between the brightness and the
[s]
darkness in the picture.
[r] The picture is sharply defined.
[s] The picture is softly focused.
[r] The colors in the picture become vivid.
[s] The colors in the picture become natural.
The noise reduction effect is enhanced. Picture resolution may
[r]
deteriorate slightly.
The noise reduction effect is reduced. You can obtain pictures
[s]
with higher resolution.
Effect