Panasonic Lumix DMC-G2 Operating Instructions Manual page 142

Advanced (Recording pictures)
[TOUCH SHUTTER]
[TOUCH GUIDE]
[TOUCH SCROLL]
[DIAL GUIDE]
•
It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Program Shift, aperture setting, or
shutter speed setting when set to [ON].
A Dial operation guide
[MENU RESUME]
[PIXEL REFRESH]
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
•
Turn the camera off and on after the pixels are corrected.
[SENSOR CLEANING]
•
Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P186)
142
VQT2S30
Enables/disables the
[OFF]:
Touch Shutter icon is not displayed on the screen, and
the Touch Shutter function is disabled.
[ON]:
Touch Shutter icon is displayed on the screen, and
[ON]/[OFF] of the Touch Shutter function can be
switched when the icon is touched.
When playing back the pictures, this allows you to set either to
display or not display the guide screen of the touch panel.
[OFF]/[ON]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[ H ]:
High speed
[ L ]:
Low speed
Sets if the operation switch guide when the mode dial is switched
to , , and
[OFF]/[ON]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
It will perform optimization of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
Touch Shutter function
is to be displayed or not.
.
A