Panasonic Lumix DMC-G2 Operating Instructions Manual page 37

o [AUTO REVIEW]
•
If it is set to [HOLD] when the camera is set to [
screen display (P58) or enlargement by rotating the rear dial is possible during Auto Review.
•
The Auto Review function is activated regardless of its setting when set to [H] for Burst Mode
(P73), for Auto Bracket (P75) and for still pictures with audio (P134). (Will not hold) Also, you
cannot set the Auto Review function.
•
If [HIGHLIGHT] (P136) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•
[AUTO REVIEW] does not work during Burst Mode when set to [M] or [L] or during recording
motion pictures.
•
When [AUTO REGISTRATION] in [FACE RECOG.] (P117) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
x [USB MODE]
•
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
[TV ASPECT]
• This will work when the AV cable is connected.
[HDMI MODE]
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the type of TV.
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[720p]:
The progressive method with 720 available scan lines is used for
output.
[480p]:
The progressive method with 480 available scan lines is used for output.
] (P51) or [ ] (P77), switching of the playback
Preparation
37
VQT2S30