Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
•
Is the subject focused?
> [FOCUS PRIORITY] is set to [ON] at the time of purchase, and so you cannot take pictures
until the subject is in focus. If you want to be able to take a picture when you press the
shutter button fully even if the subject is not focused, set [FOCUS PRIORITY] in the
[CUSTOM] menu to [OFF]. (P138)
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with finger print or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft dry
cloth.
> Refer to P186 when the image sensor gets dirty.
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated. (P72)
•
Is the AE Lock (P85) applied incorrectly?
2 or 3 pictures are taken at one time.
> Unset the settings of White Balance Bracket (P89).
The subject is not focused properly.
•
The subject is beyond the focus range of the camera. (P51)
•
There is camera shake (jitter) or the subject is moving slightly. (P53)
•
Is [FOCUS PRIORITY] in the [CUSTOM] menu set to [OFF]? (P138)
In this case, the picture may not be properly focused even if [AFS] or [AFC] in Focus Mode is
set.
•
Is the AF Lock (P85) applied incorrectly?
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
•
The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures. (P40)
> We recommend using a tripod and the self-timer (P77) when taking pictures with a slow
shutter speed.
Taking pictures using White Balance Bracket is not possible.
•
Is the number of recordable pictures 2 or less?
Recording
Others
193
VQT2S30