[REC] Mode:
Change Tone of the Color for the Picture to be
taken
(Film Mode)
[You can only select [STANDARD] and [STANDARD] (
[
] and [
] Mode.]
Just as each type of film for film cameras has its own color tone and contrast
characteristics, Film Mode allows you to select up to 9 different "digital films", color tones,
in the same way as you would select different films for film cameras. Select different
settings in Film Mode to match the photo look you wish to achieve.
Press 2 (
Touch [2]/[1] to select an item.
•
When you touch [
about each Film Mode are displayed. (When you touch
[CANCEL], the screen returns to the previous screen.)
Touch [SET].
•
You can also press the shutter button halfway to set.
Item
[STANDARD] (COLOR)
[DYNAMIC] (COLOR)
[SMOOTH] (COLOR)
[NATURE] (COLOR)
[NOSTALGIC] (COLOR)
[VIBRANT] (COLOR)
[STANDARD] (
[DYNAMIC] (
[SMOOTH] (
)
[MY FILM 1]/[MY FILM 2]
[MULTI FILM]
Note
•
In Film Mode, the camera may do something equivalent to pull processing or push processing
to create a picture with particular characteristics. The shutter speed may become very slow at
this time.
The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P138) is
•
set to [ON]. Set using the Quick Menu (P33).
).
] on the screen shown right, explanations
This is the standard setting.
The saturation and contrast of the stored colors are increased.
The contrast is lowered for smoother and clearer color.
Brighter red, green and blue. Enhanced beauty of nature.
Lower saturation and contrast. Reflecting passage of time.
Higher saturation and contrast than dynamic.
)
This is the standard setting.
)
The contrast is increased.
Smooths the picture without losing the skin texture.
The saved setting is used.
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed.
(Up to 3 pictures)
Advanced (Recording pictures)
) in [
], [¿], [
Effect
], [
], [
],
91
VQT2S30