Panasonic Lumix DMC-G2 Operating Instructions Manual page 166

Connecting to other equipment
∫ Usable functions
Operate with the remote control for the TV.
Multi Playback
One screen display
Slide show
A Operation icon
Note
•
Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while
when the operation icons are displayed. Operation icons are displayed when one of the
following buttons is pressed while the operation icons are not displayed.
3/4/2/1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button
–
•
It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• [VIERA Link]
When the
will be limited.
•
VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
•
If you are not using VIERA Link, set
166
VQT2S30
This is displayed initially when using the VIERA Link.
3/4/2/1:
[OK]:
Red button:
[SUB MENU]: Display the Playback Mode selection screen.
•
The type of data for playback changes in the order of [ALL]
>
[ ]
•
Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY
PLAY], [FAVORITE PLAY] or the [CALENDAR] can be selected
in the Playback Mode selection screen when [ALL] is selected.
Select the image while in Multi Playback, and then press [OK].
2/1:
3:
4:
[OK]:
A
Red button:
[SUB MENU]: Go to Slide Show setting screen.
During Motion Picture Playback, use 2/1 for back/forward and
•
4 to stop playback.
Press Red button during one screen display.
2/1:
4:
[OK]:
[SUB MENU]: Go to Slide Show setting screen.
A
•
To playback the audio of the motion pictures, set the [SOUND] in
the Slide Show setting screen to [AUTO] or [AUDIO].
(P38) of this unit is set to [ON], operation using the button on this unit
[VIERA Link]
Select the image.
Go to one screen display.
Switch the types of data to play back.
> >
[ ] [ ] [ALL].
Go to previous/next image.
Display the recording information.
Return to Multi Playback.
Playback the motion picture (when motion
picture is selected).
Playback the audio (when picture with audio
is selected).
Start the Slide Show.
Go to previous/next image (when Slide Show
is paused/when motion picture is played back).
Finish the Slide Show and return to one
screen display.
Pause.
(P38) to [OFF].
>