Entering Text - Panasonic Lumix DMC-G2 Operating Instructions Manual

Advanced (Recording pictures)

Entering Text

It is possible to enter babies' and pets' names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen and press
selection section.
•
You can display the entry screen via the following operations.
–
[NAME] of [BABY1]/[BABY2] or [PET] (P104) in Scene Mode.
–
[NAME] in [FACE RECOG.] (P120)
–
[LOCATION] in [TRAVEL DATE] (P123)
–
[TITLE EDIT] (P149)
Press 3/4/2/1 to select text and then press
[MENU/SET] to register.
•
Press [DISPLAY] to switch text between [A] (capitals), [a]
(lower case) and [&/1] (special characters and numbers).
•
The entry position cursor can be moved left and right with the
rear dial.
•
To enter a blank, move the cursor to [SPACE], to delete an entered character, move the
cursor to [DELETE], or to stop editing during text entry, move the cursor to [CANCEL],
and press [MENU/SET].
•
A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [FACE RECOG.])
Press 3/4/2/1 to move the cursor to [SET] and then press
[MENU/SET] to end text input.
•
Display will return to the appropriate setting screen.
Note
•
Text can be scrolled if all of the entered text does not fit on the screen.
144
VQT2S30
4
to move to the character