[Video Divide] - Panasonic Lumix DMC-G2 Operating Instructions Manual

Recorded motion picture can be
a part you need with a part you do not need.
divide
Motion picture before the dividing will be deleted.
Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu. (P32)
Press 2/1 to select the motion picture to divide,
and then press [MENU/SET].
•
Motion picture is played back.
Press 3 at the location to divide.
• Motion picture is paused.
Motion picture is played back from the same location when 3 is
pressed again.
Press 4 to execute divide.
Press 2 to select [YES] and then press
[MENU/SET].
•
Motion picture may be lost if the card or battery is removed while
processing the dividing.
Press [‚] to return to the menu screen.
• Press [MENU/SET] to close the menu.
Note
•
The [PRINT SET] setting is canceled when the motion picture set in [PRINT SET] is divided.
•
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
•
[VIDEO DIVIDE] may not be performed on motion pictures recorded with other equipment.
•
With [MOTION JPEG] motion pictures, the order of pictures will change if divided.
It is recommended to display these motion pictures by using Calendar Playback (P59) or
[MOTION JPEG PLAY] in the [PLAYBACK MODE] (P148).
• With [AVCHD Lite] motion pictures, the order of pictures will not change.
• Motion pictures cannot be divided in the following cases.
–
Motion pictures set as [FAVORITE]
–
Protected motion pictures
–
Motion pictures with a short recording time

[VIDEO DIVIDE]

d in two. It is recommended for when you want to
divide
Advanced (Playback)
153
VQT2S30