Panasonic Lumix DMC-G2 Operating Instructions Manual page 124

Advanced (Recording pictures)
Press 4 to select [LOCATION] and then press 1.
Press 4 to select [SET] and then press
[MENU/SET].
Enter the location.
•
For details on how to enter characters, refer to
Press [MENU/SET] twice to close the menu.
Take a picture.
•
The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
•
When the travel date is set, [—] appears on the lower right of the screen.
∫ Canceling the travel date
The travel date is automatically canceled if the current date is after the return date. If you
want to cancel the travel date before the end of the vacation, select [OFF] on the screen
3
shown in step
3
[OFF] in step , [LOCATION] will be also set to [OFF].
Note
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P125) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
•
The travel date setting is memorized even if the camera is turned off.
•
If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded. Even if [TRAVEL DATE] is set to [SET] after taking the pictures,
which day of the vacation you took them is not displayed.
•
If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
•
If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded)
•
[TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD Lite].
•
[LOCATION] cannot be recorded when taking motion pictures.
•
[TRAVEL DATE] cannot be set in the Intelligent Auto Mode. Setting of other Recording Mode
will be reflected.
124
VQT2S30
7
or and then press [MENU/SET] twice. If the [TRAVEL SETUP] is set to
" "
Entering Text on P144.