Panasonic Lumix DMC-G2 Operating Instructions Manual page 141

[LVF/LCD AUTO]
•
LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD].
(P42)
[¦
BUTTON SWITCH]
[ BUTTON]
[ REC AREA]
•
The recording area indicated is a guide line.
[REMAINING DISP.]
[TOUCH Q.MENU]
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
to LCD monitor display when it goes away.
[OFF]/[ON]
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
:
[SINGLE PRESS]
It will switch to Intelligent Auto Mode by pressing [¦].
[PRESS AND HOLD]
It will switch to Intelligent Auto Mode by pressing [¦] for a while.
Enables/disables the motion picture button.
[OFF]/[ON]
This changes the angle of view during motion picture recording
and still picture recording.
[!] (Picture)/[ ] (Motion picture)
This will switch display between the number of recordable
pictures and available recording time.
[REMAINING SHOTS]:
This will display the number of recordable pictures for still
pictures.
[REMAINING TIME]:
This will display the available recording time for motion pictures.
Enables/disables the
[OFF]:
Touch Quick Menu icon is not displayed on the screen,
and the Touch Quick Menu is disabled.
[ON]:
Touch Quick Menu icon is displayed on the screen,
and the setting by the Touch Quick Menu is enabled
when touched the icon.
:
Quick Menu during the touch operation
Advanced (Recording pictures)
.
VQT2S30
141