Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ANADOLU ISUZU Manuals
  4. Buses
  5. CITIPORT CNG 2020
  6. User manual

ANADOLU ISUZU CITIPORT CNG 2020 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
USER MANUAL
Revision No : 02

Advertisement

loading
Need help?

Need help?

Do you have a question about the CITIPORT CNG 2020 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ANADOLU ISUZU CITIPORT CNG 2020

Summary of Contents for ANADOLU ISUZU CITIPORT CNG 2020

  • Page 1 USER MANUAL Revision No : 02...
  • Page 2 It is a symbolic photograph of Citiport vehicle...
  • Page 3 Isuzu A.S. reserves the right to change without any prior notification. Thank you for choosing this product. We wish you a nice drive. Anadolu Isuzu Automotive Industry and Trade Inc. Headquarters : Fatih Sultan Mehmet Mah. Balkan Cad. No : 58 Buyaka E Blok Tepeüstü 34771 Ümraniye / İSTANBUL...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS PAGE INTRODUCTION Chassis Number Identification Plate Engine Number Vehicle Warranty Options Recommendations / Warnings GENERAL INFORMATION Starting The Engine Stopping The Engine Opening and Closing The Doors Emergency Exits Steering Wheel Adjustment CONTROLS AND INDICATORS Driver Control Panel Front Control Panel Side Control Panel Gauge and Warning Lights Panel...
  • Page 5 PAGE Pedals Transmission Gas Filling Accumulators Tire Inflator Kit Heating and Cooling System Electronic Brake System Engine Room Fire Detection System Engine Room Fire Extinguishing System (Optional) SERVICE AND MAINTENANCE Cleaning Vehicle Towing Vehicle Engine Maintenance Engine Lubrication Oil and Filter Care Automatic Engine Oil Refill System (Optional) Crankcase Ventilation Filter Low Pressure Fuel Filter...

  • Page 6: Introduction

    1. INTRODUCTION...
  • Page 7 It is a symbolic photograph of Citiport vehicle.

  • Page 8: Chassis Number

    CHASSIS NUMBER The chassis number of the vehicle is available on the internal cover of tin plate of the front-wheel slot. IDENTIFICATION PLATE The identification plate is in the front door entry, under the right front seat. Type approval number, VIN number, the sum of the maximum axle load, maximum front axle load and the maximum rear axle load datum are located on the identification plate.
  • Page 9 A detailed description of the composition of the VIN AIOS) ANADOLU ISUZU OTOMOTIV SANAYI VE TICARET ANONIM INTERNATIONAL WMI NO 1 - 3 SIRKETI MODEL LINE BUS GROUP PASSENGER SEATS 17 PASSENGER SEATS 18 PASSENGER SEATS 19 PASSENGER SEATS 20 PASSENGER SEATS...

  • Page 10: Engine Number

    ENGINE NUMBER The engine number is present on the engine block at the top of the oil cooler body. VEHICLE WARRANTY Warranty terms and conditions are specified in the “Warranty Certificate” given with the vehicle. You can find the detailed information about warranty procedure in “Warranty Certificate”.

  • Page 11: Options

    OPTIONS Except for the vehicle's standard features, the following options can be applied to the vehicle when requested. Maximum Permissible Hydrogen, Hydrogen Sulphide, Sulphur and Siloxane Content Requirements Test Method Hydrogen (H2) Volumetric maximum 0,03% ASTM D2650 Hydrogen Volumetric maximum 0.0006% ASTM D4084 Sulphite (H2S) Environment Protection Agency...
  • Page 12 • Take care of the maintenance of your vehicle to be done in authorized services in time and regularly in order to provide maximum performance in your vehicle. • When the fluids such as waste oil, brake fluid and antifreeze you use in your vehicle and scrap batteries are thrown away indiscriminately, this gives great damage to the environment.

  • Page 13: General Information

    2. GENERAL INFORMATION...
  • Page 14 STARTING THE ENGINE Set the main switch to the” ON “position and the gearbox to the” N “position. Turn the ignition key to the “M” position and turn the ignition key to the starter (position “D”). Do not operate the starter motor for more than 30 s and do not press the gas pedal while operating.

  • Page 15: Starting The Engine

    Winter 0 ° to -23 ° C [32 ° to Winter -23 ° -32 ° C [-10 Winter -32 ° to -54 ° C [-25 ° -9 ° F] ° to -26 ° F] to -65 ° F] Use ethylene glycol Use 50 % ethyene glycol Use 60% ethylene glycol antifreeze to maintain up to -...

  • Page 16: Stopping The Engine

    The FAULT INDICATOR LAMP indicates that the vehicle may exceed its emission level limits, is yellow and is indicated by a motor symbol. When the lamp lights, the FAULT INDICATOR LAMP indicates that the engine or exhaust gas treatment system must be repaired at the earliest opportunity.
  • Page 17 clockwise and open the door by pushing it inward.

  • Page 18: Emergency Exits

    There is also a red lock on/off control above the door for opening the door when the vehicle is locked with a key from outside, or in the event that there are passengers inside. The control is turned in the direction of the arrow when necessary and the air is evacuated by turning the air drain tap above the door, the door is opened by pulling inward.

  • Page 19: Controls And Indicators

    CONTROLS AND INDICATORS...

  • Page 20: Driver Control Panel

    DRIVER CONTROL PANEL Driver Control Panel; Front Control Panel Side Control Panel Gauge and Warning Lights Panel...

  • Page 21: Front Control Panel

    FRONT CONTROL PANEL 1. Electrical Front Curtain Switch 20. Heater Switch 2. Electrical Front Curtain Switch 21. Switch which determines the operating 3. Front Roof Vent Switch mode of the front door 4. Rear Roof Vent Switch 22. High Driving Switch 5.
  • Page 22 Electrical Front Curtain Switch It is used for opening and closing the curtain in front of the driver. When it is pressed on the lower end of the switch, curtain goes down. When the switch is released, the movement of the curtain stops and remains in the level which it was lowered.
  • Page 23 ASR Cancel Switch ASR system breakdowns when pressed on the lower end of the switch, and the system activates when pressed on the upper end. Outside Rearview Resistance Switch Outside rearview heating activates when pressed on the switch. When pressed again it breakdowns right away; when it is not pressed, it breakdowns automatically after 500 seconds.
  • Page 24 Headlights/Parking/Front-Rear Fog Lights Control Switch When it is in “0” position and turned to right once, parking lights lit, when turned one more time, headlights lit. When the switch is pulled up while the parking lights or dipped headlights were lighting, front fog lights turn on; if it is pulled up one more time, rear fog lights turn on.
  • Page 25 High Driving Switch This switch is used in the vehicle for a higher driving level than normal. The vehicle comes to a higher level when pressed on the upper end of the switch, and it comes to normal driving level when pressed on the lower end.
  • Page 26 Back Door Open/Close Switch Opens or closes the back door. The backlight lights up when the door is opened, and turns off when it is closed. Opening door qualification does not activate in speeds more than 5 km. Middle and Back Door Open/Close Switch Opens or closes both the middle door and the back door at the same time.
  • Page 27 Ignition Switch Ignition switch works against spring pressure in starter position and turns back again when released. Closed Ignition active Starter active Do not try to remove the ignition switch while the vehicle is on the move. Signal and Wiper Lever It signals to left when the lever is in the downstream and to right when the lever is in the upstream.

  • Page 28: Side Control Panel

    SIDE CONTROL PANEL 1. Amplifier 2. Cup Holder 3. Lighter 4. Mirror Control Switch 5. Emergency Switch 6. LCD Switch 7. Driver Window Switch 8. Handbrake Amplifier Increasing and decreasing the volume of speakers are performed with amplifier. Lighter The lighter is pushed towards the heating element inside of it, it gets out automatically when heated.
  • Page 29 Emergency Switch In order to use the emergency switch, the red colored safety cover on it is opened by holding up. When pushed forward, the electricity of the system cuts down, the engine stops, all internal lights and hazards turn on, door switches are in the active and workable position.

  • Page 30: Gauge And Warning Lights Panel

    Handbrake Handbrake system is air typed and spring mechanismed. Handbrake lever is on the left control panel. The handbrake lever is pulled back when the vehicle is stopped, the lever has to be locked in the lower position. In order to relieve the brake, the lever is released to front by pulling slightly the ratch under the lever.
  • Page 31 Front Fog Warning: It is the yellow colored warning which lights during the usage of front fog lamps. Rear Fog Warning: It is the yellow colored warning which lights during the usage of rear fog lamps. Signal Warnings: It is the green colored audible warning that shows the turns to right or left and that flashes when the signal lever on the steering wheel or hazard switch is used.
  • Page 32 Engine STOP Warning: It is the red colored warning which lights when there is a critical engine failure, apply to the Authorized Service. Air Suction Stopped Warning: It is the yellow colored warning which shows that the air suction is not sufficient. Engine Cooling Fluid Level Warning: It is the red colored and audible warning which shows that the engine cooling fluid level decreased and it has to be added.
  • Page 33 Air Condition Is Active Warning: It is the blue colored warning which lights after 2 minutes from the activation of the air condition. Fire Warning: It is the red colored and audible warning which lights when the temperature of the engine room exceeds 175 °C. Stop Warning for Disabled Passengers: It lights when pressed stop button for disabled passengers.
  • Page 34 Speed (km/hour) Indicator t is the indicator which shows the speed of the vehicle in terms of kilometers/hour. It starts to work after the moving of the vehicle. Fuel Indicator Fuel indicator shows the level of the fuel in fuel tank. When the needle nears “0”, the red light at the bottom right of the indicator lights;...

  • Page 35: Vehicle Equipment

    4.VEHICLE EQUIPMENT...

  • Page 36: Driver Seat

    DRIVER SEAT Seat Tilt Adjustment: The button on the left is pulled up in order to adjust the incline of the seat shell. By giving the weight to the front and back at the same time, the incline of the seat is comes to the desired position. Backrest Tilt Adjustment: It is adjusted by unlocking the backrest (lock lever is pulled up) and the backrest is reclined by pushing backwards.

  • Page 37: Passenger Seats

    PASSENGER SEATS The vehicle has 27 passenger seats (24 + 3 folding seats). The passenger seats are fabric upholstered. The vehicle is equipped with triple seat in the rear, two single seats in the front right, a single in the front left and two in the other seats. There are 3 folding seats opposite the central door.

  • Page 38: Dvd Player

    DVD PLAYER There is a USB and AUX-IN entry DVD player at the upper console of the driver compartment. DIGITAL TACHOGRAPH (OPTION) It is located at the top of the windscreen, on the driver's side. Records, displays or prints data about the driver and vehicle. The recording is done on the internal memory unit in the device and on the tachograph card placed on the device.

  • Page 39: Diagnostic Socket

    DIAGNOSTIC SOCKET It is at the backwards of the driver seat. This socket is used for loading and changing the parameters of the vehicle data communication system and for diagnostics. PASSENGER INFORMATION PANEL There is a digital panel available at the right back of the driver for informing passengers.

  • Page 40: Lcd Display

    Digital Colored Front Route Indicator Panel (Optional) There are 3 options available; one of which is at front (colored), one of which is lateral and one of which is at rear. LCD Display There is one 19’’ LCD display at the front side of the vehicle. This screen may be used for informing the passengers and for ad impressions.

  • Page 41: Stop Button

    STOP BUTTON There are 11 stop buttons 7 of which are on the holding pipes, 3 of which are on the side wall for priority passengers and 1 for disabled passengers in the vehicle. The passengers who want to get off the vehicle, informs the driver by pressing on these buttons.

  • Page 42: Disabled Passengers Ramp

    DISABLED PASSENGERS RAMP A manual opening/closing ramp is installed to the middle door in order to ease the entry/exit of the disabled passengers with wheel chairs. The Use of Ramp Stop the vehicle in a place where the traffic is suitable. •...

  • Page 43: Rear View System

    REAR VIEW SYSTEM There is a closed-circuit camera system available which monitorizes the area behind the vehicle when parking or reversing the vehicle. The sights obtained from the camera are monitorized on the LCD display on the front control panel. PARKING SENSORS There are 4 parking sensors mounted on the fender.
  • Page 44 Set of Front Headlight Rear Lights...
  • Page 45 Side Signal Lights Side Signal Light There are totally 2 side signal lights at right and left of the vehicle. They work with front and rear signal lights. Sidemarkers and Clearance Lights There are 4 clearance lights, 2 of which are at the upper front and 2 of which are at the upper rear of the vehicle.

  • Page 46: Pedals

    PEDALS Brake Pedal: The pedal at left is brake pedal. This pedal is part of electronic brake system (EBS). An electric signal is sent to the central control unit when pressed on the brake pedal and the air is dispersed to brake elements. Gas Pedal: The pedal at right is gas pedal.
  • Page 47 While shifting the gear; • Do not press on the gas pedal • The speed of the engine should be less than 900 rpm • The vehicle must be in stop position • It should be pressed on the brake pedal •...

  • Page 48: Gas Filling

    Retarder Specification Retarder is the hydrodynamic brake specification of transmission which is used for extending the life of service brakes. It works at three stages with lever and/or brake pedal. Retarder works at 1 stage when pressed on the brake pedal first, when the pedal is being pressed it raises up to 3 stage and by this way it increases the brake torque.

  • Page 49: Heating And Cooling System

    • Park the vehicle in the way not blocking the traffic. • Get the gear into neutral by pulling the handbrake, start the engine. • Take the tire inflator kit. • Insert one end of the hose to the tire valve and the other end to the air outlet end behind the middle door.
  • Page 50 Control Unit Button Functions Button no Function of the Button Opens/Closes the heating mode on driver’s side Selects the circulation / fresh air mode on driver’s side Selects the position of air flaps on driver’s side (foot/foot-glove box/front window) Takes mist of the glass on driver’s side Adjusts the fan efficiency manually on driver’s side Starts the cooling mode on driver’s side Opens/closes air condition on passenger’s side...
  • Page 51 Then the indicator automatically shows the temperature of the passenger side (internal temperature) again. Operating The Ceiling Air Condition in Cooling Mode Start the engine of your vehicle. Press on the Auto button on the control unit, when you press on “Auto”...
  • Page 52 Led I (Evaporator blower fan 1 stage active (related led lights) Led II (Evaporator blower fan 2 stage active (related led lights) Led III (Evaporator blower fan 3 stage active (related led lights) Operating The Passenger Side Air Condition in Air Circulation Mode It operates in the “Air Circulation Mode”...
  • Page 53 At the same time, when you press T5 fan button, you can see the fan speed you had chosen on the control unit screen with the following codes. Blowing Fan 0 Blowing Fan 1 stage Blowing Fan 2 stage Blowing Fan 3 stage Taking Mist of Front Window with Front/Driver Side Air Condition The front window mist taking starts automatically when you...
  • Page 54 F0 - Passenger side blowing fan is off F1 - Passenger side blowing fan 1st stage F2 - Passenger side blowing fan 2 stage F3 - Passenger side blowing fan 3 stage dF0 - Driver side frontbox blowing fan / off dF1 - Driver side frontbox blowing fan / 1 stage dF2 - Driver side frontbox blowing fan / 2...

  • Page 55: Electronic Brake System

    ELECTRONIC BRAKE SYSTEM (EBS) Electronic brake system has both electronic and pneumatic infrastructure. Under normal conditions the brake system is controlled electronically. The brake demand coming from the driver is operated by control unit, the most suitable brake at that condition is generated.

  • Page 56: Engine Room Fire Extinguishing System (Optional)

    ENGINE ROOM FIRE EXTINGUISHING SYSTEM (OPTIONAL) This is a system which consists of a pressure fire detection hose and fire spout nozzles which pass from the areas where a fire may occur in the engine room. There are 2 tanks in the system, one is the nitrogen tank which provides the detection of fire, and the other one is the fighting tank in which there was fire extinguishing fluid.

  • Page 57: Service And Maintenance

    5.SERVICE and MAINTENANCE...

  • Page 58: Cleaning Vehicle

    CLEANING VEHICLE External Cleaning • Do not clean your vehicle with detergents and chemicals, do not wipe with gas. • Use pressured water for vehicle cleaning (except for engine area), do not remain the residual water on the vehicle after cleaning, take the residual water with cloth or chamois leather.

  • Page 59: Engine Maintenance

    ENGINE MAINTENANCE It is achieved to the engine of the vehicle from 4 parts. It is possible to achieve the engine from the rear, left, inside and below the vehicle. Rear Lower Cap It can be reached to alternators, air conditioning compressor, V belts, recirculation pump, fuel water separator, the oil tank of engine oil complement, diesel exhaust emission fluid tank, ECM (Electric...
  • Page 60 Left Side Radiator Cap Cooling unit, expansion tank water filling collar and level surveillance window can be reached by opening left side radiator cap. Left Side Filter Cap Air filter, the valve related to the heating system, valve and the pump can be reached by opening the left side filter cap. Internal Caps By opening 2 caps inside the vehicle it can be reached to air compressor, hydraulic fan, steering pump, fuel filter,...
  • Page 61 Lower Cap The engine oil sump can be achieved by opening the cap below the vehicle Start / Stop Button Group If it is needed to start the engine during a maintenance and repairing activity of the engine, the rear lower cap of the vehicle is opened and the start/stop button group here is used.

  • Page 62: Engine

    ENGINE Exhaust Tail Pipe A/C Compressor Exhaust Gas Processor Unit Engine Oil Tank (Option) Water Filler Cap Hydraulic Fan Motor Expansion Tank Hydraulic Oil Tank Cooling Unit Oil Level Bar Alternator Recirculation Pump Crankshaft...
  • Page 63 DPD Unit Fan Pump Transmission Oil Filler Cap Gearbox Engine Oil Cap Air Compressor...
  • Page 64 Air Filter Turbo Unit...

  • Page 65: Lubrication Oil And Filter Care

    LUBRICATION OIL AND FILTER CARE Do not use diesel engine oil in natural gas engines. If diesel engine oil is used, valve flare, piston wear and spark plug life may be reduced. NOTE: The oil of natural gas engines, like diesel oil, does not become tarnished and dirty. To determine the oil change intervals, use the recommended maintenance intervals, not the appearance of the oil.

  • Page 66: Crankcase Ventilation Filter

    CRANKCASE VENTILATION FILTER • Loosen the crankcase vent hose clamp (from above) or drain hose clamp (from below) and remove the crankcase vent hose or drain hose. Remove the filter element made of paper from the filter. • Turn the cover by hand or counter clockwise with a wrench with a rubber or fabric rim. •...

  • Page 67: Low Pressure Fuel Filter

    LOW PRESSURE FUEL FILTER Filtering and separating the oil from the fuel is important to ensure that the fuel system operates smoothly and has a long life. In certain cases, when the pressure is applied to the fuel, oil will enter the fuel in the gas compressors. Some of the components in the fuel system are susceptible to oil contamination.

  • Page 68: Engine Coolant Water Filter

    6. Before removing any parts, turn off the fuel supply at the fuel stop valve of the vehicle near the filter. 7. Let the engine idle until it stops. 8. Clean the area around the fuel filter cap. 9. Remove the fuel filter with the oil filter wrench. 10.
  • Page 69 • Close the coolant inlet and outlet valves in the cooling water filter head by turning the valves clockwise. • Use the coolant filter switch to remove the coolant filter. Discard the coolant filter. • Turn the shutter valve to the OFF position by turning the knobs clockwise until the valves close completely.

  • Page 70: Engine Cooling System

    The valve must be in the ON position to prevent engine damage. • Fit the cooling water system pressure cap. • Start the engine and check for coolant leaks. • Check the coolant level after airing through the system. • Apply a thin layer of lubricating oil to the seal sealing surface before installing the new coolant filter.
  • Page 71 Open the expansion tank cover. Starts filling the engine cooling system fluid with the mixture of 50% antifreeze and 50% diluted water from the cap on the side surface of expansion tank. When the expansion tank is full, stop filling. Wait for 1-2 minutes before starting the engine to make sure that air which entered in the system from natural ways is discharged and cooling fluid level is balanced.

  • Page 72: Control Of Brake Discs And Pads

    Check whether there is cooling fluid leakage in layout and main components during filling and air relief processes. It is the customer’s responsibility to daily check the cooling fluid level and fill if required. Do not remove the filler cap when the engine is hot. When the radiator overheats, the temperature increases excessively and pressure builds up.

  • Page 73: Differential Oil Change

    Oil Replacing Interval The transmission oil must be changed at 120000 km or every 3 years, whichever comes first. The gearbox pressure filter must also be changed with each oil change. Discharging Oil • Discharge the transmission oil during 10 minutes when the transmission was hot •...

  • Page 74: Air Condition Compressor Belt

    AIR CONDITION COMPRESSOR BELT Air condition compressor belt is double 17, V belt. The codes on the belt are shown below. When the belts damage or break, apply to the authorized service for change. The compressor belt must be stretched by tightening the bolt nuts from specified points (must be performed by the authorized service).

  • Page 75: Steering Wheel Hydraulic Tank

    Do not start the engine if the valve is closed. There is the risk of burst and breaking since the belt was not stretched. Do not get close while the engine was running and the belt was on the way and do not touch the belt with hand. STEERING WHEEL HYDRAULIC TANK It is located at right side of the engine when the engine rear maintenance cap was opened.

  • Page 76: Glass Fountain Water Tank

    GLASS FOUNTAIN WATER TANK Picture 1 The dashboard cover of the vehicle is opened (Picture 2) with the help of lever at the level of left knee of the driver (Picture 1). After the cover was opened, maximum till to the level of 10 lt window washing water can be put into the tank.

  • Page 77: Air Dryer

    Air Filter Elements The replacement of air filter elements must be realized in every 30000 km, for replacement the steps below must be followed: Open the lock on the cap. Turn the cap in the opposite direction of the clockwise. Remove the cap by pulling it towards yourself.

  • Page 78: Replacing Wipers

    REPLACING WIPERS There are 2 external wiper levers in the vehicle at right and left. For the replacement of the wiper, the bolts and nuts on the middle side of the wiper are removed (Picture 1 and Picture 2). Picture 1 Picture 2 For the complete replacement of external wiper lever, the plastic cap on the point where it connects to the vehicle’s body is opened, the wiper lever is removed by removing the...

  • Page 79: Replacement Of Bulbs

    REPLACEMENT OF BULBS The Replacement of Low Beam Bulb • Open the front hood • Remove the rubber protective behind the headlights unit by pulling • Remove the bulb by pressing the wire clips inwards • Replace with an equivalent bulb •...
  • Page 80 The Replacement of the Day Drive Bulbs • Open the hood • Remove the headlights cap • Remove the brackets which prevent the bulbs on the cap dislodging by removing their screws • Remove the bulbs from their slots • Remove the adapter (driver) •...

  • Page 81: Use Of The Jack And Tire Replacement

    The Replacement of the Rear Plate Bulbs • Remove the bulb by loosening screws • Remove it from the socket • Replace with an equivalent bulb • Insert the bulb by screwing USE OF THE JACK AND TIRE REPLACEMENT The jacking points of the vehicle are on the body and behind the front and rear wheels. The Usage of Jack •...
  • Page 82 Wheel nut tightening sequence Wheel with 5 nuts Wheel with 6 nuts Front wheel nuts Rear wheel nuts Model or specification Tightening torque Quantity Tightening torque Quantity 600 N·m Single tire 600 N·m Dual tire 5 or 6 Advice • After changing a tire, turn the steering wheel in both directions to make sure that the wheels do not interfere with the surrounding components.

  • Page 83: The Periodic Maintenance

    THE PERIODIC MAINTENANCE DAILY MAINTENANCE • Check the tires • Check the operation of the brakes • Check the engine coolant level • Check the engine oil level • Empty the water in the air tanks (especially in winter) • Check that the outdoor lighting is suitable for safe driving.
  • Page 84 Maintenance required every 2000 or 2 years • Check the carbon thickness accumulated in the air compressor pressure line. • Check the cooling system hose and the loose clamp. • Check the turbo unit. • Check the motor vibration damper and the rubber element (viscous element, if present) CAUTION •...
  • Page 85 Maintenance Interval (x1000 km) 105 120 Period Info ENGINE Diagnostic control of engine failures Engine oil 1000 h or 1 year Engine oil refill 1 year Valve adjustment 2000 h or 2 years Spark plugs 1500 h Spark plug cable Coil extension R : 300.000 km or 10.000 h or 5 years Oil filter...
  • Page 86 Maintenance Interval (x1000 km) 105 120 Period Info ECAS settings Air bellows OTHER Function control of headlights, signals, parking, fog and brake lights Internal illumination control Function of wipers and window washing system General control of fuse panel, electric cables and sockets Battery connection control Battery electrolyte density Starter electric connections...

  • Page 87: Technical Information

    6. TECHNICAL INFORMATION...
  • Page 88 Dimensions (mm) Maximum length 12030 Maximum width 2550 Maximum height 3136 (including A/C unit) Wheelbase 5850 Front overhang 2700 Rear overhang 3480 Front track width 2152 Rear track width 1872 Masses (kg) Gross Vehicle Mass 17900 Max. 11400 kg Empty mass Front axle capacity 6840 Rear axle capacity...
  • Page 89 Tyres 275/70 R22,5 Minimum turning radius (mm) 9110 Gradeablity 25,10% (at GVM) Suspension Air suspension - 2 bellows Independend Süspansiyon Front electronically controlled (ECAS) Air suspension - 4 bellows Rear electronically controlled (ECAS) Brake system Front / Rear Disc / Disc Full air brake system with EBS Brief expalantion (Automatic oil, water seperator system is...

  • Page 90: Fluid Specifications

    FLUID SPECIFICATIONS DESCRIPT ION CAPACITY NORM CLASS SAE15W 40 Engine Oil 26 lt CES-20092 Complement of Engine SAE15W 40 6 lt CES-20092 Oil (Optional) 24 lt (38 litres in 20F according to TE-ML20.110 Transmission Oil and the first TE-ML20.110 Filter filling) Differential Oil &...
  • Page 91 PRESSURE VALUES Four Way Protector ≥5,5 Bars Static Closing Pressure Valve Air Dryer Minimum Opening Pressure 8,1 Bars 10,45 Bars Air Dryer Maximum Closing Pressure 9 bars / 131 psi Wheels Cold Mixed Inflation Pressure...

  • Page 92: The List Of Foreign Distributors

    7. THE LIST OF FOREIGN DISTRIBUTORS...
  • Page 93 COUNTRY STORE NAME STORE ADDRESS CONTACT NUMBER Rue Baha H'med, ALGERIA Spa Elsecom BP 200 Bab Ezzouar - +213 (0)23 85 30 86 Alger 2207 Nobel avenue AZERBAIJAN AZ Auto LLC +(994) 124964598 AZ1006 - Bakü Blažuj 78, 71215 BOSNIA Sejari d.o.o.

This manual is also suitable for:

E6 citiport 2020