1. Manuals
  2. Brands
  3. ANADOLU ISUZU Manuals
  4. Buses
  5. CITIPORT E6 2019
  6. User manual

ANADOLU ISUZU CITIPORT E6 2019 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Revision No : 01
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CITIPORT E6 2019 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ANADOLU ISUZU CITIPORT E6 2019

Summary of Contents for ANADOLU ISUZU CITIPORT E6 2019

  • Page 1 USER MANUAL Revision No : 01...
  • Page 2 It is a symbolic photograph of Citiport vehicle...
  • Page 3 Isuzu A.S. reserves the right to change without any prior notification. Thank you for choosing this product. We wish you a nice drive. Anadolu Isuzu Automotive Industry and Trade Inc. Headquarters : Fatih Sultan Mehmet Mah. Balkan Cad. No : 58 Buyaka E Blok Tepeüstü 34771 Ümraniye / İSTANBUL...

  • Page 4: Table Of Contents

    TABLE OF CONTENTS PAGE INTRODUCTION Chassis Number Identification Plate Engine Number Vehicle Warranty Options Recommendations / Warnings GENERAL INFORMATION Starting The Engine Stopping The Engine Opening and Closing The Doors Emergency Exits Steering Wheel Adjustment CONTROLS AND INDICATORS Driver Control Panel Front Control Panel Side Control Panel Gauge and Warning Lights Panel...
  • Page 5 PAGE Pedals Transmission Fuel Tank and Cap Accumulators Tire Inflator Kit Heating and Cooling System Preheater (Optional) SCR System and Diesel Exhaust Emission Fluid Tank Diesel Exhaust Emission Fluid Heating System Electronic Brake System Engine Room Fire Detection System Engine Room Fire Extinguishing System (Optional) Automatic Greasing System (Optional) SERVICE AND MAINTENANCE Cleaning Vehicle...

  • Page 6: Introduction

    1. INTRODUCTION...
  • Page 7 It is a symbolic photograph of Citiport vehicle.

  • Page 8: Chassis Number

    CHASSIS NUMBER The chassis number of the vehicle is available on the internal cover of tin plate of the front-wheel slot. IDENTIFICATION PLATE The identification plate is in the front door entry, under the right front seat. Type approval number, VIN number, the sum of the maximum axle load, maximum front axle load and the maximum rear axle load datum are located on the identification plate.
  • Page 9 A detailed description of the composition of the VIN (SAMPLE) (AIOS) ANADOLU ISUZU OTOMOTIV SANAYI VE TICARET ANONIM 1 - 3 INTERNATIONAL WMI NO: NNA: SIRKETI MODEL LINE BUS GROUP 14 PASSENGER SEATS 17 PASSENGER SEATS 18 PASSENGER SEATS 19 PASSENGER SEATS...

  • Page 10: Engine Number

    ENGINE NUMBER Engine number is indicated in 2 places on the engine On the engine identification label on the cylinder head cover. On the body of the oil cooler in the engine block. VEHICLE WARRANTY Warranty terms and conditions are specified in the “Warranty Certificate” given with the vehicle.

  • Page 11: Recommendations / Warnings

    RECOMMENDATIONS / WARNINGS Use only specified fuel (EN590 suitable sulfur content maximum 10ppm) in your • vehicle. Use diesel exhaust emission fluid suited for DIN70070. • Do not load your vehicle over its passenger capacity and do not change the places of •...
  • Page 12 Do not go on driving when a warning light turns on. Do not forget that you have to get • the corrective action by applying the instructions of counters, warning lights and indicator lights. When the vehicle malfunctions during the drive, turn on the hazard warning flashers •...

  • Page 13: General Information

    2. GENERAL INFORMATION...

  • Page 14: Starting The Engine

    STARTING THE ENGINE Bring main switch to “ON” and the transmission to “N” position. By bringing the ignition switch to “M” position, turn it and press the starter button (“D” position). Do not run the starter more than 30 seconds and do not press the accelerator pedal while operating.

  • Page 15: Opening And Closing The Doors

    OPENING AND CLOSING THE DOORS The front door of the vehicle is opened/closed from the outside with the remote control. There are door open/close switches in front control panel in order the doors to be opened/closed from the inside. Opening Doors in Emergencies There are air drain taps above the doors for emergencies.

  • Page 16: Emergency Exits

    EMERGENCY EXITS In emergency cases, emergency exit may be ensured by breaking the windows at the right and left of the vehicle and on the trapdoor with the help of emergency attractive. STEERING WHEEL ADJUSTMENT Steering wheel may be adjusted to up, down, front and back according to the comfortable drive of the driver.

  • Page 17: Controls And Indicators

    CONTROLS AND INDICATORS...

  • Page 18: Driver Control Panel

    DRIVER CONTROL PANEL Driver Control Panel covers; Front Control Panel Side Control Panel Gauge and Warning Lights Panel...

  • Page 19: Front Control Panel

    FRONT CONTROL PANEL 1. Electrical Front Curtain Switch 20. Heater Switch 2. Electrical Front Curtain Switch 21. Switch which determines the operating 3. Front Roof Vent Switch mode of the front door 4. Rear Roof Vent Switch 22. High Driving Switch 5.
  • Page 20 Electrical Front Curtain Switch It is used for opening and closing the curtain in front of the driver. When it is pressed on the lower end of the switch, curtain goes down. When the switch is released, the movement of the curtain stops and remains in the level which it was lowered.
  • Page 21 ASR Cancel Switch ASR system breakdowns when pressed on the lower end of the switch, and the system activates when pressed on the upper end. Outside Rearview Resistance Switch Outside rearview heating activates when pressed on the switch. When pressed again it breakdowns right away; when it is not pressed, it breakdowns automatically after 500 seconds.
  • Page 22 Headlights/Parking/Front-Rear Fog Lights Control Switch When it is in “0” position and turned to right once, parking lights lit, when turned one more time, headlights lit. When the switch is pulled up while the parking lights or dipped headlights were lighting, front fog lights turn on; if it is pulled up one more time, rear fog lights turn on.
  • Page 23 High Driving Switch This switch is used in the vehicle for a higher driving level than normal. The vehicle comes to a higher level when pressed on the upper end of the switch, and it comes to normal driving level when pressed on the lower end.
  • Page 24 Middle Door Open/Close Switch Opens or closes the middle door. The backlight lights up when the door is opened, and turns off when it is closed. Opening door qualification does not activate in speeds more than 5 km. Back Door Open/Close Switch Opens or closes the back door.
  • Page 25 Retarder Control Lever Retarder activates or breakdowns in 3 stages. Ignition Switch Ignition switch works against spring pressure in starter position and turns back again when released. Closed Ignition active Starter active Do not try to remove the ignition switch while the vehicle is on the move. Signal and Wiper Lever It signals to left when the lever is in the downstream and to right when the lever is in the upstream.

  • Page 26: Side Control Panel

    SIDE CONTROL PANEL Amplifier Increasing and decreasing the volume of speakers are performed with amplifier. Lighter The lighter is pushed towards the heating element inside of it, it gets out automatically when heated. Mirror Control Switch This switch is used for the driver to adjust the directions of the rearview mirrors by himself.
  • Page 27 Emergency Switch In order to use the emergency switch, the red colored safety cover on it is opened by holding up. When pushed forward, the electricity of the system cuts down, the engine stops, all internal lights and hazards turn on, door switches are in the active and workable position.

  • Page 28: Gauge And Warning Lights Panel

    Handbrake Handbrake system is air typed and spring mechanismed. Handbrake lever is on the left control panel. The handbrake lever is pulled back when the vehicle is stopped, the lever has to be locked in the lower position. In order to relieve the brake, the lever is released to front by pulling slightly the ratch under the lever.
  • Page 29 Front Fog Warning: It is the yellow colored warning which lights during the usage of front fog lamps. Rear Fog Warning: It is the yellow colored warning which lights during the usage of rear fog lamps. Signal Warnings: It is the green colored audible warning that shows the turns to right or left and that flashes when the signal lever on the steering wheel or hazard switch is used.
  • Page 30 Engine STOP Warning: It is the red colored warning which lights when there is a critical engine failure, apply to the Authorized Service. Air Suction Stopped Warning: It is the yellow colored warning which shows that the air suction is not sufficient. Engine Cooling Fluid Level Warning: It is the red colored and audible warning which shows that the engine cooling fluid level decreased and it has to be added.
  • Page 31 Air Condition Is Active Warning: It is the blue colored warning which lights after 2 minutes from the activation of the air condition. Fire Warning: It is the red colored and audible warning which lights when the temperature of the engine room exceeds 175 °C. Stop Warning for Disabled Passengers: It lights when pressed stop button for disabled passengers.
  • Page 32 Fuel Indicator Fuel indicator shows the level of the fuel in fuel tank. When the needle nears “0”, the red light at the bottom right of the indicator lights; it means that the fuel is reduced. Extra fuel should be added before the fuel in the fuel tank completely finished, otherwise the system makes- up air.

  • Page 33: Vehicle Equipment

    4.VEHICLE EQUIPMENT...

  • Page 34: Driver Seat

    DRIVER SEAT Seat Tilt Adjustment: The button on the left is pulled up in order to adjust the incline of the seat shell. By giving the weight to the front and back at the same time, the incline of the seat is comes to the desired position. Backrest Tilt Adjustment: It is adjusted by unlocking the backrest (lock lever is pulled up) and the backrest is reclined by pushing backwards.

  • Page 35: Passenger Seats

    PASSENGER SEATS There are 27 passenger seats in the standard vehicle (24 + 3 folding seats). Passenger seats are upholstered. There is a triple seat at the rear, two single seats at the right ahead, one single seat on the left front wheel and dual seats in other sections in the vehicle. There are 3 folding seats available in front of the middle door.

  • Page 36: Side Window With Resistance

    SIDE WINDOW WITH RESISTANCE It is located at the left side of the driver. By driving electric engine, the switches on the front control panel can be controlled by the driver. When the movable glass is broken or when the electric motor fails, apply to the authorized service.

  • Page 37: Roller Blinds

    ROLLER BLINDS There are electrical roller blinds on the driver compartment part of the front window. The opening and closing of the roller blinds are provided by the curtain switches on front control panel. (In Citiport S vehicles, these roller blinds are opened and closed manually.) There is also another roller blind at the left of the driver which can be opened and closed manually.

  • Page 38: Digital Route Indicator Panel

    DIGITAL ROUTE INDICATOR PANEL There is one digital route indicator panel at the front (turning the corner) and one at the rear. (In Citiport S vehicles, instead of turning the corner indicator panel, there are separate indicator panels. One is at the front and the other is on the right side.) Digital Colored Front Route Indicator Panel (Optional) There are 3 options available;...

  • Page 39: Trapdoor

    TRAPDOOR There are 2 trapdoors including front and rear in the vehicle. They are electrically controlled. The opening/ closing operations of the covers according to the desired direction of the air inlet are realized with the air condition switch on the front control panel.

  • Page 40: Pack Area

    PACK AREA There is a pack area (except Citiport S vehicles) on the front wheel arch in which passengers may put the things in their hands (umbrella, package, suitcases etc.) designed passengers to travel in comfort. WHEEL CHAIR FIXING AREA There is a special place in front of the middle door for the passenger who enters the vehicle with wheel chair in...

  • Page 41: External Camera System

    Stop the vehicle in a place where the traffic is suitable. Open the middle door. • Open the ramp by holding it from its handle on it and by pushing towards the • outside of the vehicle. Provide the entry/exit of disabled passengers. •...

  • Page 42: Parking Sensors

    There is a closed-circuit camera system available which monitorizes the area behind the vehicle when parking or reversing the vehicle. The sights obtained from the camera are monitorized on the LCD display on the front control panel. PARKING SENSORS There are 4 parking sensors mounted on the fender.
  • Page 43 Set of Front Headlight Rear Lights...
  • Page 44 Side Signal Lights Side Signal Light There are totally 2 side signal lights at right and left of the vehicle. They work with front and rear signal lights. Sidemarkers and Clearance Lights There are 4 clearance lights, 2 of which are at the upper front and 2 of which are at the upper rear of the vehicle.

  • Page 45: Pedals

    PEDALS Brake Pedal: The pedal at left is brake pedal. This pedal is part of electronic brake system (EBS). An electric signal is sent to the central control unit when pressed on the brake pedal and the air is dispersed to brake elements. Gas Pedal: The pedal at right is gas pedal.
  • Page 46 While shifting the gear; Do not press on the gas pedal • The speed of the engine should be less than 900 rpm • The vehicle must be in stop position • It should be pressed on the brake pedal •...

  • Page 47: Fuel Tank And Cap

    Retarder Specification Retarder is the hydrodynamic brake specification of transmission which is used for extending the life of service brakes. It works at three stages with lever and/or brake pedal. Retarder works at 1 stage when pressed on the brake pedal first, when the pedal is being pressed it raises up to 3 stage and by this way it increases the brake torque.

  • Page 48: Heating And Cooling System

    Park the vehicle in the way not blocking the traffic. • Get the gear into neutral by pulling the handbrake, start the engine. • Take the tire inflator kit. • Insert one end of the hose to the tire valve and the other end to the air outlet end •...
  • Page 49 Control Unit Button Functions Button no Function of the Button Opens/Closes the heating mode on driver’s side Selects the circulation / fresh air mode on driver’s side Selects the position of air flaps on driver’s side (foot/foot-glove box/front window) Takes mist of the glass on driver’s side Adjusts the fan efficiency manually on driver’s side Starts the cooling mode on driver’s side Opens/closes air condition on passenger’s side...
  • Page 50 Increase the desired ambiance temperature value by pressing on T10 button. Maximum 30 °C may be adjusted. Decrease the desired ambiance temperature value by pressing on T11 button. Minimum 15 °C may be adjusted. Then the indicator automatically shows the temperature of the passenger side (internal temperature) again.
  • Page 51 When you adjusted the desired comfortable temperature value for running in “heating mode” of the passenger air condition minimum 1.5 degrees more than the passenger side temperature, the ceiling air condition would begin to work in heating mode. Blowing fans operate at 1 st stage in heating mode.
  • Page 52 Operating The Front/Driver Side Air Condition in Cooling Mode The solenoid valve turns on when you press T6 driver side cooling button on the control unit and cooling starts. The related led turns on. When you press the same button once again to close, the led turns off and closes.
  • Page 53 Screenshot dF0/ Blowing Fan 0/off Screenshot dF1/Blowing Fan 1 stage Screenshot dF2/ Blowing Fan 2 stage Screenshot dF3/ Blowing Fan 3 stage Taking Mist of Front Window with Front/Driver Side Air Condition The front window mist taking starts automatically when you press T4“DEF”.

  • Page 54: Preheater (Optional)

    F0 - Passenger side blowing fan is off F1 - Passenger side blowing fan 1st stage F2 - Passenger side blowing fan 2 stage F3 - Passenger side blowing fan 3 stage dF0 - Driver side frontbox blowing fan / off dF1 - Driver side frontbox blowing fan / 1 stage dF2 - Driver side frontbox blowing fan / 2...
  • Page 55 Preheater is in the cupboard behind the rear wheels. The 3-way valve is closed only for preheating the motor coolant (it is to be pressed on – position). The desired programming may be adjusted with the program clock. The 3-way valve is opened in order to support heating system (it is to be pressed on + position).
  • Page 56 Usage of Preheater Preheater control unit is located on the upper console of the driver compartment. Main Functions of The Push Buttons: You may start the heater or confirm the entries with this button. You may close the heater, quit the menus or stop the functions with this button. You may select the functions and make settings with these buttons.

  • Page 57: Scr System And Diesel Exhaust Emission Fluid Tank

    confirm the settings with it. The heater begins to work. To close, press on button for 2 seconds. Additional Unit Symbol Additional unit function can be activated by authorized services of Eberspaecher. Operating The Ventilation With Additional Unit Select confirm with Apply the steps in Operating The Ventilation section.
  • Page 58 Dosıng Pump Urea Tank Oıesel Exnaust Fluid vaıve IDEF) Oosınc ====:;: lt'ltlrı Ext>.iiu:st and ammonta Tl--:ı>" intoSCR H•r•th•yrucı c:at11lyıt. totıarmıus u-an:sformı nitrcıe.n ;andwatervapour. ttı sends fog, ammonia create<l. (NH,) b:haust eas goes decradation reaaor...
  • Page 59 Diesel exhaust emission fluid is an urea solution in demineralized water at the rate of 32,5%. It is the fluid consumed for reducing the emission rates of the engine. Diesel exhaust emission fluid is sprayed into exhaust gases by dosing pump. It converts these gases into pure nitrogen and water by reacting with the exhausted nitrogen oxide gases which were formed during combustion.
  • Page 60 There are two types of regeneration: Moving Regeneration: It is the regeneration performed when the vehicle was moving. This regeneration shall start automatically when the DPF is near occlusion or after 100 hours of use from the last regeneration; and when the speed of the vehicle and the gas flow of the exhaust system exceeded specified values.

  • Page 61: Diesel Exhaust Emission Fluid Heating System

    DIESEL EXHAUST EMISSION FLUID HEATING SYSTEM The diesel exhaust emission fluid used in the vehicle begins to freeze at -11 °C. The engine begins to spray ureas to the exhaust system when its heat has increased. If the fluid in the tank remained frozen when the engine heated, the engine cuts power since there would be no urea spraying operation.

  • Page 62: Engine Room Fire Detection System

    ENGINE ROOM FIRE DETECTION SYSTEM This is a system which gives a red-colored and audible warning when the engine room temperature exceeds 175 °C. There are fire detection sensors available in the engine room. ENGINE ROOM FIRE EXTINGUISHING SYSTEM (OPTIONAL) This is a system which consists of a pressure fire detection hose and fire spout nozzles which pass from the areas where a fire may occur in the engine room.

  • Page 63: Automatic Greasing System (Optional)

    piping system, but if it was too late for this, remove the nozzles and clean nozzles and pipes with water. Replace the nozzles if required. Insert protection covers to nozzles again. • Activate the system again by mounting filled tanks. •...
  • Page 64 When the lubricant in the reservoir has fallen to the minimum level it must be refilled. Generally a filler pump is used for this purpose. The procedure is as follows: With a new filler pump (or filling hose) the hose should first be primed with lubricant. •...

  • Page 65: Service And Maintenance

    5.SERVICE and MAINTENANCE...

  • Page 66: Cleaning Vehicle

    CLEANING VEHICLE External Cleaning Do not clean your vehicle with detergents and chemicals, do not wipe with gas. • Use pressured water for vehicle cleaning (except for engine area), do not remain • the residual water on the vehicle after cleaning, take the residual water with cloth or chamois leather.

  • Page 67: Engine Maintenance

    ENGINE MAINTENANCE It is achieved to the engine of the vehicle from 4 parts. It is possible to achieve the engine from the rear, left, inside and below the vehicle. Rear Lower Cap It can be reached to alternators, air conditioning compressor, V belts, recirculation pump, fuel water separator, the oil tank of engine oil complement, diesel exhaust emission fluid tank, ECM (Electric...
  • Page 68 Left Side Radiator Cap Cooling unit, expansion tank water filling collar and level surveillance window can be reached by opening left side radiator cap. Left Side Filter Cap Air filter, the valve related to the heating system, valve and the pump can be reached by opening the left side filter cap. Internal Caps By opening 2 caps inside the vehicle it can be reached to air compressor, hydraulic fan, steering pump, fuel filter,...
  • Page 69 Lower Cap The engine oil sump can be achieved by opening the cap below the vehicle Start / Stop Button Group If it is needed to start the engine during a maintenance and repairing activity of the engine, the rear lower cap of the vehicle is opened and the start/stop button group here is used.
  • Page 70 ENGINE 1) Exhaust Tail Pipe 10) A/C Compressor 2) Exhaust Gas Processor Unit 11) Urea Tank 3) Water Filler Cap 12) Engine Control Module 4) Expansion Tank 13) Start / Stop Button Group 5) Cooling Unit 14) Tandem Pump (Fan & Steering) 6) Alternator 15) Hydraulic Fan Motor 7) Alternator...
  • Page 71 1) Oil Dipstick 2) Engine Oil Filler Cap 3) Air Compressor 4) Transmission Oil Filler Cap 5) Fuel filter 6) Fuel Pump...
  • Page 72 1) Torque Converter Oil Cooler 2) Transmission Oil Cooler 3) Transmission Oil Pan 4) Starter 5) Engine Oil Pan 6) Oil filter 7) Transmission Oil Filler Cap 8) Turbo Compressor Unit...

  • Page 73: Engine Lubrication System

    ENGINE LUBRICATION SYSTEM Replacement of Engine Oil Bring the vehicle to a horizontal position • Run the engine till the cooling fluid reaches to 60 °C temperature • Turn off the engine • Remove the oil drain plug, pour the oil to the oil collection container (if the oil draining •...

  • Page 74: Engine Cooling System

    ENGINE COOLING SYSTEM Engine cooling system provides the engine heat to remain in appropriate temperature interval, thus the engine works efficiently and by maintaining the oil viscosity the wear of the engine parts is prevented. The system also cools the transmission. At the same time, it also ensures the hot water necessity of the heating system and the heating of diesel exhaust emission fluid tank (optional) in very low temperatures.

  • Page 75: Oil Filter Replacement

    Check whether the cabin heater temperatures have risen. Total air relief for cabin heater and A/C system lasts for about 15 minutes. Make sure that air relief is completed. Close the manual valves on the waterlines tied to cabin heater and A/C units (engine water inlet and outlet).

  • Page 76: Fuel Filter Replacement

    FUEL FILTER REPLACEMENT Fuel filter can be reached from left lower cap. For the replacement of fuel filter; Remove the fuel filter • Remove the filter element made out of paper from the filter • Remove the o-ring from filter •...

  • Page 77: Control Of Brake Discs And Pads

    CONTROL OF BRAKE DISCS AND PADS Pad warning indicator must be controlled regularly. It has to be taken to the authorized service when the pad indicator value is 10%. Right and left brake pads on the same axle must be replaced together. The original brake parts specified by the manufacturer of the vehicle must be used.

  • Page 78: Differential Oil Change

    Oil Replacing Interval The transmission oil should be replaced at every 180000 km. The transmission pressure filter should also be replaced in every oil replacement. Discharging Oil Discharge the transmission oil during 10 minutes when the transmission was hot • Stop the engine •...

  • Page 79: Air Condition Compressor Belt

    AIR CONDITION COMPRESSOR BELT Air condition compressor belt is double 17, V belt. The codes on the belt are shown below. When the belts damage or break, apply to the authorized service for change. The compressor belt must be stretched by tightening the bolt nuts from specified points (must be performed by the authorized service).

  • Page 80: Steering Wheel Hydraulic Tank

    Do not start the engine if the valve is closed. There is the risk of burst and breaking since the belt was not stretched. Do not get close while the engine was running and the belt was on the way and do not touch the belt with hand. STEERING WHEEL HYDRAULIC TANK It is located at right side of the engine when the engine rear maintenance cap was opened.

  • Page 81: Glass Fountain Water Tank

    GLASS FOUNTAIN WATER TANK Picture 1 The dashboard cover of the vehicle is opened (Picture 2) with the help of lever at the level of left knee of the driver (Picture 1). After the cover was opened, maximum till to the level of 10 lt window washing water can be put into the tank.

  • Page 82: Air Filter

    AIR FILTER The air filter can be reached by opening the left rear side cover of the vehicle. The rubber dust valve below is used to discharge the accumulated dust by squeezing the edges in order to clean the air filter. Air Filter Elements The replacement of air filter elements must be realized in every 30000 km, for replacement the steps below must be followed:...

  • Page 83: Draining Water In Air Tanks

    DRAINING WATER IN AIR TANKS There are 3 air tank drain valves under driver region and 2 air tank drain valves in the lower part, between middle door and rear wheel on the right. Drain water in air tanks daily, by pressing on the valves. REPLACING WIPERS There are 2 external wiper levers in the vehicle at right and left.

  • Page 84: Fuses/Relays

    For the complete replacement of external wiper lever, the plastic cap on the point where it connects to the vehicle’s body is opened, the wiper lever is removed by removing the nuts there (Picture 3). During the removement of wiper lever, the sprinkler hose connected to the lever must be removed by pulling from the point where it was connected to the body of the vehicle (Picture 4).
  • Page 85 Insert it in the position of rubber protective hole facing downward • Replacement of parking light bulb Open the front hood • Pull the socket end on which there is a bulb and which is located under the headlights • unit Replace with an equivalent bulb •...
  • Page 86 The Replacement of the Front Fog Lights Lamp Remove the rubber protective behind the headlights unit by pulling • Remove the bulb by pressing the wire clips inwards • Replace with an equivalent bulb • Insert it in the position of rubber protective hole facing downward •...

  • Page 87: Use Of The Jack And Tire Replacement

    USE OF THE JACK AND TIRE REPLACEMENT The jacking points of the vehicle are on the body and behind the front and rear wheels. The Usage of Jack Be sure that the drain plug is tightened • Use its own jack handle in order to hold the jack •...

  • Page 88: The Periodic Maintenance

    THE PERIODIC MAINTENANCE DAILY MAINTENANCE Check the tires • Check the brakes • Check the engine coolant level • Check the engine oil level • Drain the condensed water from the air tanks especially in winter months • Check the diesel exhaust emission fluid level •...
  • Page 89 Maintenance Interval (*1000km) ENGINE Diagnostic control of engine Failures (or 1 (or 1 (or 1 (or 1 (or 1 (or 1 Engine oil year) year) year) year) year) year) (or 1 (or 1 (or 1 (or 1 (or 1 (or 1 Engine oil refill (Optional) year) year)
  • Page 90 Maintenance Interval ( * 1000 km) Brake pipes and hoses, leaks Brake pads and disc eye control Calliper adjusting bolt Measuring calliper gap Calliper piston blowers Measuring calliper control movement Overheating of rims Looseness in shock absorbers and connectors ECAS settings Air bellows Function control of headlights, signals, parking lights, fog...

  • Page 91: Technical Information

    6. TECHNICAL INFORMATION...
  • Page 92 Dimensions (mm) Maximum length 12030 Maximum width 2550 Maximum height 3136 (including A/C unit) Wheelbase 5850 Front overhang 2700 Rear overhang 3480 Front track width 2152 Rear track width 1872 Masses (kg) Gross Vehicle Mass 17900 Max. 11400 kg Empty mass Front axle capacity 6840 Rear axle capacity...
  • Page 93 Tyres 275/70 R22,5 Minimum turning radius (mm) 9110 Gradeablity 25,10% (at GVM) Suspension Air suspension - 2 bellows Front Independend Süspansiyon electronically controlled (ECAS) Air suspension - 4 bellows Rear electronically controlled (ECAS) Brake system Front / Rear Disc / Disc Full air brake system with EBS Brief expalantion (Automatic oil, water seperator system is...
  • Page 94 FLUID SPECIFICATIONS DESCRIPT ION CAPACITY NORM CLASS CES-20086, API CK-4 or SAE15W 40 Engine Oil 26 lt CES-20081, ACEA E-9 Complement of Engine CES-20086, API CK-4 or SAE15W 40 6 lt Oil (Optional) CES-20081, ACEA E-9 24 lt (38 litres in Transmission Oil and the first TE-ML20.110...
  • Page 95 PRESSURE VALUES Four Way Protector ≥5,5 Bars Static Closing Pressure Valve Air Dryer Minimum Opening Pressure 8,1 Bars 10,45 Bars Air Dryer Maximum Closing Pressure 9 bars / 131 psi Wheels Cold Mixed Inflation Pressure...

  • Page 96: The List Of Foreign Distributors

    7. THE LIST OF FOREIGN DISTRIBUTORS...
  • Page 97 COUNTRY STORE NAME STORE ADDRESS CONTACT NUMBER Rue Baha H'med, ALGERIA Spa Elsecom BP 200 Bab Ezzouar - +213 (0)23 85 30 86 Alger 2207 Nobel avenue AZERBAIJAN AZ Auto LLC +(994) 124964598 AZ1006 - Bakü Blažuj 78, 71215 BOSNIA Sejari d.o.o.

Table of Contents