DCS DishDrawer DD124 Series Use & Care Manual page 29

PROBLEM
Unclean dishes
POSSIBLE CAUSE
Wash program
unsuitable for the load.
Spray arm unable to
rotate.
DishDrawer®
overloaded/incorrectly
loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the
wrong compartment.
Excessive food
not removed from
dinnerware prior to
cleaning.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are
blocked.
Filter plate/drain filter is
blocked.
Mega rack incorrectly
installed.
Insufficient salt in the
water softener
(DD224-H, DD124-H
models only).
WHAT TO DO
Refer to the wash programs section
for a suitable wash program, or the
soils were too heavily baked on and
dishes may need soaking.
Ensure no items are obstructing the
spray arm path.
Refer to the section on loading.
Refer to the user maintenance
section.
Detergent must be placed in the
large compartment.
Scrape all food scraps off
dinnerware prior to loading.
Use recommended brands of
dishwasher detergent.
Refer to the detergent section
or the detergent manufacturer's
instructions.
Clean the spray arm.
Clean the filter plate and drain filter.
Refer to the accessories section for
correct installation.
Ensure there is enough salt in the
water softener and you may need to
increase the water softener setting
if the problem persists.
23