DCS DishDrawer DD124 Series Use & Care Manual page 21

Fit the cap tightly back into its original position.
4
If you do not wash your dishes immediately after filling the salt reservoir, run a rinse
5
program to remove any salt water or spilt granules.
Note
When filling the salt dispenser, you may notice water being displaced from the water
softener overflow.
Important!
The water softener must always be filled with granular salt made especially for
dishwasher water softening systems e.g. Somat salt. Do not use cooking salt
like table, rock, pellets or salt for domestic water softeners as they may contain
impurities that will impair or diminish the life of the water softener.
The salt reservoir
Water softening can only take place
when there is salt in the reservoir. The
salt reservoir must be filled prior to using
the DishDrawer® and whenever the salt
reservoir indicator light is red.
Salt indicator light
If the salt indicator light is red, the salt reservoir
is empty.
If the salt indicator light is black, there is
enough salt in the reservoir for the wash
program that has been selected.
Important!
Do not pour detergent or rinse agent into
the salt reservoir. Detergent and rinse
agent will destroy the water softener.
a
b
Salt reservoir
Salt Indicator Light
a
Salt Reservoir Cap
b
Salt Only
NO Detergent NO Rinse Agent
15