Rotenso CONTROL Series User Manual page 40

RSC wired central controller
EN
8. OTHERS
8.1 An example to show the function of the weekly timer
Take the indoor unit of the air conditioner with an address 04 for example, set the weekly timer parameters and
start up the weekly timer function according to the above operation. The specific setting parameter is as shown
in the table below:
Period 1
Time on = 07:30
Time off = 18:00
Monday Mode = cool
Temp = 24
Fan = High
Time on = 07:30
Time off = 18:00
Tuesday Mode = cool
Temp = 24
Fan = Low
From the above table, we can see that the indoor unit has been set weekly timer parameters for two days every
week, namely period 1, 2, 3 of Monday and period 1 of Tuesday. If the weekly timer function is started up, the air
conditioner will run according to the corresponding period setting when it is within the specific period.
Notes to the parameter of period 1 of Monday: The startup time is 07:30 and shutdown time is 18:30. The running
mode is cool with 24 degree and high Speed.
If the air conditioner is running within the set period of the weekly timer and there is other control device
to control the air conditioner, the air conditioner will run according to the set parameter of the control devices
(such as remote controller, line controller and weekly-timer central controller) till to the next set period
of the weekly timer.
If the set mode of a period of the air conditioner is Off, it means the weekly timer function of the period is invalid.
For example, the set mode of period 2 of Tuesday is Off, which shows that the set weekly timer function of the
period is invalid.
40
User manual
Period 2
Time on = 18:30
Time off = 21:00
Mode = Fan-only
Temp =
Fan = High
Time on = 18:30
Time off = 19:00
Mode = Off
Temp =
Fan =
Period 3
Time on = 21 30
Time off = 23 30
Mode = cool
Temp = 24
Fan = High
-
Period 4
-
-