Trox Technik X-CUBE X2 compact 2 Operating Instructions Manual page 6

Safety
Safety signs
1 Safety
1.1 Correct use
The TROX air handling unit X-CUBE X2 compact 2 is a
centralised ventilation unit that is used for the ventilation
and air conditioning of various indoor spaces, such as
Offices

Meeting rooms

Lounges

Commercial and production companies

Schools

Hospitals

Clean rooms

The following process steps can be carried out for air
treatment:
Transport

Filtering

Heating

Cooling

The appliance may only be operated indoors; appli-
ances with weather protection can be set up outdoors,
e.g. on the roof of a building.
Access to the AHU must be prevented for unauthorised
persons, e.g. by means of a spatial partition (operating
room). Publicly accessible appliances must be secured
by lockable inspection access doors.
The appliance may only be operated in accordance with
the operating parameters specified in the order data
sheet and on the rating plates.
Any other use is expressly excluded. Deviations require
prior agreement or authorisation by TROX.
Incorrect use
WARNING!
Danger due to incorrect use!
Incorrect use of the air handling unit can lead to
dangerous situations.
Never use the air handling unit:
– in rooms with explosive gases or gas mixtures
– in rooms with conductive dust
– in rooms with strong electromagnetic fields
– in rooms with aggressive room air components,
e.g. sand
– outside of the design specifications, see TROX
air handling unit data sheet
– for structural purposes or as the building roof
– as a smoke extract system in the event of a fire.
6
1.2 Safety signs
The following symbols and signs are usually found in
the work area. They apply to the very location where
they are found.
WARNING!
Danger due to illegible signage!
Over time, stickers and signs may fade or become
otherwise illegible, meaning that hazards cannot
be identified and necessary operating instructions
cannot be followed. There is then a risk of injury.
– Ensure that all of the safety, warning and oper-
ating information is clearly legible.
– Replace illegible signs or stickers immediately.
Earthing
These stickers are located in the switch cabinet and
at all equipotential bonding connection points, see
Ä 'Equipotential bonding' on page 7 , on the air
handling unit.
Electrical voltage
Only skilled qualified electricians must work on AHU
components and in internal spaces with this sign.
Unauthorised people must not enter areas, open cabi-
nets or work on components where an electrical voltage
is present and which are hence marked with this
symbol.
AHU X-CUBE X2 compact 2