Trox Technik X-CUBE X2 compact 2 Operating Instructions Manual page 3

About this manual
This manual enables operating or service personnel to
use the X-CUBE air handling unit (AHU) safely and effi-
ciently.
The operating manual is intended for use by instructed
persons.
It is essential that instructed persons (
1.9.1 'Qualification' on page 15 ) read and fully
understand this manual before starting any work. The
basic prerequisite for safe working is to comply with the
safety notes and all instructions in this manual.
The local regulations for health and safety at work and
the general safety regulations for the area of application
of the air handling unit also apply.
Illustrations in this manual are mainly for information
and may differ from the actual design of the air handling
unit.
Other applicable documentation
In addition to this manual, the following documents
apply:
Transport and installation manual

order-specific release drawing

Data sheets for components from other suppliers, if

any
TROX Technical Support
To ensure that your request is processed as quickly
as possible, please have the following information avail-
able:
Product name

TROX order number and line number

Delivery date

Brief description of fault or issue

Online
Phone
Ä Chapter
www.troxtechnik.com
+49 2845 202-0
AHU X-CUBE X2 compact 2
Supplemental directives
Copyright
This document, including all illustrations, is protected
by copyright and pertains only to the corresponding
product.
Any use without our consent may be an infringement
of copyright, and the violator will be held liable for any
damage.
This applies in particular to:
Publishing content

Copying content

Translating content

Microcopying content

Saving content to electronic systems and editing it

Limitation of liability
The information in this manual has been compiled with
reference to the applicable standards and guidelines,
the state of the art, and our expertise and experience of
many years.
The manufacturer does not accept any liability for dam-
ages resulting from:
Non-compliance with this manual

Incorrect use

Operation or handling by untrained individuals

Unauthorised modifications

Technical changes

Use of non-approved replacement parts

The actual scope of delivery may differ from the infor-
mation in this manual for bespoke constructions, addi-
tional order options or as a result of recent technical
changes.
The obligations agreed in the order, the general terms
and conditions, the manufacturer's terms of delivery,
and the legal regulations in effect at the time the con-
tract is signed shall apply.
We reserve the right to make technical changes.
Warranty claims
The general delivery terms apply to warranty claims.
Please refer to local warranty regulation found on the
local TROX website.
3