Network Scanning; Operation Flow; Scanning Documents From The Mfp - Muratec MFX-1330 User Manual

Network Scanning

Operation flow

The network scanning operations are as follows:
1
Scan the document from the MFP into a OfficeBridge Scan Box.
2
Download the scanned data from the Scan Box.

Scanning documents from the MFP

1
On the MFP, press[COPY4FAX4SCAN] to change to the scanner mode.
Scan Ready
2
Place the document face up in the automatic document feeder (ADF), or
face down on the document glass.
When you use the document glass, select the document size by pressing
[Doc. Size].
3
Set the scanning settings, if necessary.
• Resolution
Press [Doc. Resolution] to select the resolution.
Document type
Text, Photo&Text, Photo 200, 300, 600 dpi
• Contrast
Press [Contrast] to set how light or dark you want the documents to be.
To avoid confusing the Light and Dark settings, just remember — "Light
lightens" and "Dark darkens" — to keep it straight.
• Document type
Press [Doc. Resolution] then press [ ] or [ ] to select the document type.
Document type
Text
Photo&Text
Photo
NOTE: Color scanning is not available in this feature.
300dpi
Auto 100%
Available resolution
node
Select this mode when scanning text.
Select this mode when scanning documents
containing photographs or drawings and
text.
Select this mode when scanning photographs
or drawings.
Using the OfficeBridge
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
2-15