Smtp/Pop Server Settings - Muratec MFX-1330 User Manual

SMTP/POP server settings

This sets the email sending/receiving environment.
NOTE: If the administrator is registered, you should log-in as an administrator to
access this setting.
1
Log-in to "OfficeBridge".
2
Click [SMTP/POP] on the "Admin Tools" tab.
The "SMTP/POP Settings" screen will appear.
"Sender
Informa-
tion"
"Mail
Server"
3-56 Using the Admin Tools
Item
Name
E-mail Address
Sending mail (SMTP)
Server
Receiving mail
(POP3) Server
Description
Sets the name that is displayed in the sender
field ("From" field) when sending e-mail.
Up to 40 characters can be registered.
Enter the e-mail address that is assigned to
your machine.
Up to 50 characters can be registered.
Enter the domain name or IP address of the
SMTP server used for sending e-mail.
When entering a domain name, it can be
entered up to 50 characters.
Enter the domain name or IP address of the
POP3 server used for receiving e-mail.
When entering a domain name, it can be
entered up to 50 characters.
NOTE: Even if the STMP server and the
POP3 server are the same server, set
both.