Formatting - Mpio FG200 User Manual

Formatting

You can format FG200 from a Windows PC using MPIO Utility.
1 Connect the player to the PC USB terminal while the power is on, using the USB cable.
Double-click MPIO Utility icon in your desktop.
2
3 Click the [Format & Config] button.
Click
5 Click the [ Start ] button.
Click
4 Click the [ OK ] button.
Click
6 Click the [ OK ] button.
Click
7 When formatting is complete, click the [ OK ]
button.
Click
9 Click the [ OK ] button after the "Safely
Remove Hardware" message appears as
shown.
Click
Note
The captured screens of MPIO Utility may vary for the user's PC environment.
MPIO Utility cannot be run under MAC OS.
For information regarding MPIO Utility installation, refer to [Installing the software] on page 15.
8 Click the [ Close ] button.
Click
10 After clicking the [ OK ] button, Format & Config
(Default Setting Restoration) is complete. You
may separate the device from the PC.
Click