Recharging - Mpio FG200 User Manual

Digital multimedia player
Table of Contents

Advertisement

Recharging

Charging the battery while the power is off
1
Connect the player to the PC USB terminal as described in the figure, while the power is off, using the
USB cable.
Connect with a USB Cable
The USB cable connection status will be displayed on the LCD.
2
If no data transmission is detected between PC and portable disc, battery charging will
3
be started after a certain period of time with battery lamp (
When using the player for a first time, recharge the player for 4 hours before use.
Recharging time: 3 hours (From Empty to Full)
Note
You can also charge the battery while playing back the music when you connect the USB cable while the power is
on. At this time, the available battery amount lamp will flash so that you can check the charging status. When fully
charged, the icon will be changed to (
).
) flashing.
About the Internal Rechargeable Battery
Do not charge the battery past the specified time.
Do not charge the battery past the specified time. It may cause a fire.
When the playback time reduces dramatically, the internal rechargeable battery must be replaced.
Overcharging and complete discharging the battery may reduce its lifespan.
To use the battery for a long time, recharge the battery fully, and recharge it after complete discharge.
Repeatedly recharging the battery after short use may reduce its lifespan. If recharged after short use,
repeating full recharge and drain will restore the battery's performance.
When using the battery for a first time, or first time in several months, recharge it fully before use.
Battery is an expendable item. Its performance will decrease after the point of purchase.
Do not make the battery come in contact with electric conductors such as a necklace. It may cause fire
or electric shock.
Note
Contact MPIO Service Center for replacing the internal battery.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents